JVC DR-MV5S User Manual
Filename [MV5S_08Basic TimerDub.fm]
Masterpage:Left+
32
EN
TIMER RECORDING
Page 32Tuesday, 8 March 2005 19:32
You can program each deck to timer-record as many as
8 programs up to 30 days ahead.
If you do not know the VCR Plus+ number for the program you
wish to record, use the following procedure to set your unit to
timer-record the program.
8 programs up to 30 days ahead.
If you do not know the VCR Plus+ number for the program you
wish to record, use the following procedure to set your unit to
timer-record the program.
NOTES:
● When two successive programs are recorded on a DVD-RW disc with
Manual Timer Programing function, the beginning of the second one
may be left off the recording.
may be left off the recording.
● If the copy limited program is received during timer-recording, the unit
enters Record Pause mode. Recording starts again if it is switched to
a recordable broadcast during the time you programed.
a recordable broadcast during the time you programed.
● In case of a power failure after programing, the unit’s memory backup
keeps your selections for approximately 5 seconds.
● Programs that start after midnight must have the next day’s date.
● To record the programs received by cable box or DBS receiver,
record on the DVD discs. For details, refer to “Cable Box and DBS
Receiver Users (DVD Deck Only)” above.
Receiver Users (DVD Deck Only)” above.
1
Press DVD or VHS to select the deck on which you want to
perform timer programing.
2
For DVD deck
Load a recordable disc.
For VHS deck
Load a cassette with safety tab intact.
Load a cassette with safety tab intact.
3
Press PROG to access the
Program Check screen.
● When “PROGRAM FULL
DELETE UNWANTED TIMER
PROGRAM” appears on the TV
screen, you need to cancel some
of the reserved programs.
(
PROGRAM” appears on the TV
screen, you need to cancel some
of the reserved programs.
(
4
For DVD deck
Press rt w e to select “DVD PRGM CHECK” and press rt to
select “DVD NEW TIMER PROGRAM”, then press ENTER.
select “DVD NEW TIMER PROGRAM”, then press ENTER.
For VHS deck
Press rt w e to select “VHS
PRGM CHECK” and press rt to
select “VHS NEW TIMER
PROGRAM”, then press ENTER.
Press rt w e to select “VHS
PRGM CHECK” and press rt to
select “VHS NEW TIMER
PROGRAM”, then press ENTER.
5
Press rt to set the desired
date.
● The current date appears on the
TV screen. The date you enter
appears in its place.
appears in its place.
6
Press w e to select “START”, then press rt to set the desired
start time.
● Each press of rt advances/goes back the start time in 1-min.
increments.
● To advance/go back the start time in 30-min. increments, press and
hold rt.
7
Press w e to select “STOP”, then press rt to set the desired
stop time.
● Each press of rt advances/goes back the stop time in 1-min.
increments.
● To advance/go back the stop time in 30-min. increments, press and
hold rt.
8
Press w e to select “CH”, then press rt to select the desired
channel.
9
Press w e to select the desired recording option as required.
● Refer to step 6 in “VCR Plus+
10
Press ENTER to access the Program Confirmation screen.
11
Press ENTER to complete timer programing.
● If “PROGRAM OVERLAPPED” appears on the TV screen, see
page 35.
12
Press TIMER # to engage the unit’s timer mode. The DVD
timer lamp lights up on the unit and the unit is automatically turned
off.
off.
● To disengage the timer mode, press TIMER # again.
Manual Timer Programing
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
Cable Box and DBS Receiver Users (DVD Deck Only)
To timer-record a satellite broadcast using Manual Timer
Programing:
A Perform “Manual Timer Programing”.
B Set the cable box or DBS receiver to the appropriate channel
before the selected program begins.
C Select “L-1” in step 8.
D Leave the cable box or DBS receiver’s power on.
To timer-record a satellite broadcast using Manual Timer
Programing:
A Perform “Manual Timer Programing”.
B Set the cable box or DBS receiver to the appropriate channel
before the selected program begins.
C Select “L-1” in step 8.
D Leave the cable box or DBS receiver’s power on.
rtwe
ENTER
DVD
VHS
TIMER
PROG
VHS PRGM CHECK
DATE
++++++++++++++++DVD NEW TIMER PROGRAM ++++++++++++++++
START
CH
DAILY/WEEKLY REC MODE
05/07 SAT
7:00PM - 8:00PM
44
WEEKLY
SP
DISC TIMER PRGM
10/07 THU 10:00PM - 10:30PM
10
XP
11/07 FRI 08:00AM - 09:00AM
26
LP
STOP
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
THEN PRESS [ENTER]
OK
SELECT
PROG
EXIT
11/07 FRI 08:30AM - 09:30AM
33
LP
DVD PRGM CHECK
TIMER PROGRAM
DATE
START
STOP
CH
10/07/03 THU
- - : - -
- - : - -
- -
DAILY/WEEKLY
REC MODE
SP
NAME
SET TIMER PROGRAMING WITH [CURSORS]
THEN PRESS [ENTER]
THEN PRESS [ENTER]
CONFIRM
SELECT
PROG
EXIT
MV5S_00.book Page 32 Tuesday, March 8, 2005 7:38 PM