JVC DR-MV5S User Manual
Masterpage:Right0
EN
59
Filename [MV5S_09Advanced Operation.fm]
Page 59Thursday, 24 February 2005 14:48
ADVANCED RECORDING
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-minutes interval), and shuts the unit off after
recording is finished.
(selectable in 30-minutes interval), and shuts the unit off after
recording is finished.
1
Press 7 on the unit to start recording.
2
Press 7 again to engage the ITR mode.
● On the front display panel, “0:30” appears.
3
If you want to record for more than 30 minutes, press 7 to
extend the time. Each press extends recording time by 30 minutes.
NOTE:
NOTE:
You can only perform ITR using the 7 button on the unit.
Watch Another Program While Recording On The Unit
While recording is going on, you can watch another program on the
TV by using the TV’s tuner.
NOTE:
TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV
in advance. (
in advance. (
1
During recording, press TV INPUT to switch the TV’s input
mode so that the program selected on the TV appears.
2
Slide the TV/DVD switch to TV.
3
Press CH +/– repeatedly to select the desired channel.
Elapsed Recording Time And Disc Remaining Time
Indication
Indication
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
indication appears on the front display panel.
● Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time ] Disc remaining time ] Clock ] (Back to
the beginning)
Elapsed recording time ] Disc remaining time ] Clock ] (Back to
the beginning)
● You can also check the disc remaining time by pressing REMAIN
while the unit is stopped or recording is in progress. The list of disc
remaining times for all recording modes appears on the TV screen.
remaining times for all recording modes appears on the TV screen.
Second Audio Recording
This unit’s built-in MTS decoder enables reception of Multichannel
TV Sound broadcast. To record a SAP program received, set “2ND
AUDIO RECORD” to “ON”. (
TV Sound broadcast. To record a SAP program received, set “2ND
AUDIO RECORD” to “ON”. (
NOTE:
When the channel is changed on the unit;
● The “MONO” indicator appears on the screen for about 5 seconds if
the program is a monaural broadcast.
● The “STEREO” indicator appears on the screen for about 5 seconds
if the program is a stereo broadcast.
● Both “STEREO” and “SAP” indicators appear when a stereo program
is accompanied by SAP sound.
● Both “MONO” and “SAP” indicators appear when the main audio on
the monaural broadcast is accompanied by SAP sound.
Advanced Recording (DVD)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press DVD so that the DVD lamp lights up on the unit.
VHS/DVD
DVD
VHS
REC
VHS
DVD
DUBBING
CH
DV IN
STANDBY/ON
S-VIDEO
VIDEO
AUDIO
REMAIN
DISPLAY
CH +/–
TV INPUT
DVD
MV5S_00.book Page 59 Thursday, February 24, 2005 4:17 PM