JVC DR-MV5S User Manual

Page of 88
Filename [MV5S_09Advanced Operation.fm]
Masterpage:Left+
60
 
EN
ADVANCED RECORDING
Page 60Thursday, 24 February 2005  14:48
Free Rate Function
To record the entire program, the unit automatically sets the 
appropriate recording mode depending on the combination of the 
total time of the program to be recorded and either the remaining 
disc space or the specified recording time (from 60 minutes to 480 
minutes).
To record the entire program within the actual remaining 
disc space
Select “FR (JUST)” in a recording mode selection procedure.
● Note that this function is available only for timer programing recording 
To record the entire program by specifying the desired 
recording time
Select “FR60–FR360”, “FR420” or “FR480” in a recording mode 
selection procedure. (
To record a 25-min. long daily program five times just on 
the same DVD disc for example
Perform “VCR Plus+
sure to set the recording mode to “FR125” and set Weekly/Daily 
Rec Function to “MON–FRI” in step 6 to fit the total recording time 
to the whole disc space.
When the same program is recorded in SP mode instead of in 
“FR125”, the 5th program cannot be recorded.
NOTES:
● You can program this unit to timer-record, regardless of the disc 
remaining time. When the disc remaining time is not enough, 
recording may stop in the middle of a program. To avoid this, make 
sure of the disc remaining time before setting timer programing.
(Example) If you programed to timer-record for 60 minutes in SP 
mode on a 120-minute disc, the disc remaining time would be 30 
minutes in XP mode, 60 minutes in SP mode, 120 minutes in LP 
mode, 180 minutes in EP mode, and 240 minutes in FR480 mode. 
Timer-recording will not complete beyond these remaining times.
● The maximum recording time of “FR (JUST)”mode is the same as the 
recording time of FR480 mode. When timer programing a long 
program in “FR (JUST)”mode on a disc whose remaining time is 
short, it is recommended to check the disc remaining time in FR480 
mode to see if the remaining time is enough for the program.
● Even if more than one program are timer programed in “FR (JUST)” 
mode, only the first one is recorded.
● In order to ensure that the recording fits on the disc, this feature may 
leave a slight non-recorded section at the end of the disc.
● There may be some noise and sound disturbance at the point on the 
disc where the unit switches the mode.
Blank
A: 1st
B: 2nd
C: 3rd
D: 4th
E: 5th
A: 1st
B: 2nd
C: 3rd
D: 4th
E: Blank (20 min.)
Blank
Advanced Recording (VHS)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press VHS so that the VHS lamp lights up on the unit.
DISPLAY
CH +/–
TV INPUT
C.RESET
VHS
VHS/DVD
DVD
VHS
REC
VHS
DVD
DUBBING
CH
DV IN
STANDBY/ON
S-VIDEO
VIDEO
AUDIO
MV5S_00.book  Page 60  Thursday, February 24, 2005  4:17 PM