Panasonic MW-10 User Manual
RQT9522-P
H0809WM0
En
Specifi cations
AMPLIFIER SECTION
RMS Output Power
Stereo mode
Stereo mode
Both ch driven 5 W Per channel
6
6
Ω, 1 kHz, 10 % THD
Total RMS Stereo mode power: 10 W
FTC Output Power
Stereo mode
Stereo mode
Both ch driven 5 W Per channel
6
6
Ω, 90 Hz - 20 kHz, 10% THD
Total FTC Stereo mode power: 10 W
Input and Output
terminal
terminal
Headphone: stereo mini plug (3.5 mm)
Used Headphone impedance: 16 to 64
Ω
iPod: iPod special terminal
USB: USB 2.0 High speed
USB: USB 2.0 High speed
FM TUNER SECTION
Preset Memory
30 stations
Frequency range
87.9 to 107.9 MHz (200 kHz steps)
87.5 to 108.0 MHz (100 kHz steps)
87.5 to 108.0 MHz (100 kHz steps)
Sensitivity
16.3 dBf (1.8 μV, IHF’58)
Antenna terminal
75
Ω (unbalanced)
AM TUNER SECTION
Preset Memory
15 stations
Frequency range
520 to 1710 kHz (10 kHz steps)
Sensitivity (S/N 20 dB)
500 μV/m
CD SECTION
Beam source
Semiconductor laser
Wavelength
795 nm
Number of channels
2 channels (Stereo)
Wow and fl utter
Below measurable limit
Playable disc
CD, CD-R, CD-RW
Playable format disc
CD-DA
INTERNAL MEMORY SECTION
Mounted capacity
4 GB
AC ADAPTOR SECTION
Input
AC 110 V to 240 V, 36 W, 50/60 Hz
Output
DC 12 V, 2000 mA
PHOTO SECTION
LCD size
9 inch
Aspect ratio
16:9
Use File format
(CD/SD/Internal
memory)
(CD/SD/Internal
memory)
JPEG: Exif 2.2, JFIF
¼
Progressive JPEG No Support
¼
4:2:0, 4:2:2, 4:4:4 type base line JPEG
•
Maximum number of
pixels
pixels
5120 × 3840
Minimum number of
pixels
pixels
64 × 64
Maximum decode
fi le size
fi le size
10 MB
SPEAKER SECTION
Type
1 way, 1 speaker system
Full range: 4 cm × 2 cone type
Full range: 4 cm × 2 cone type
Impedance
6
Ω
Input power (IEC)
10 W (Max)
Magnetic-shield design
No
Playback frequency
range
range
70 Hz to 25 kHz (-16 dB)
120 Hz to 22 kHz (-10 dB)
120 Hz to 22 kHz (-10 dB)
GENERAL
Dimensions
(W x H x D)
(W x H x D)
252 mm × 201 mm × 150 mm
(9-15/16" × 7-15/16" × 5-29/32")
(9-15/16" × 7-15/16" × 5-29/32")
Mass
Approx. 1.9 kg (4.2 lbs)
Permissible operating
temperature
temperature
0 ºC to + 35 ºC
(32 ºF to + 95 ºF)
(32 ºF to + 95 ºF)
Permissible relative
humidity
humidity
35 % to 80 % RH (No condensation)
Power consumption in standby mode
¼
: Approx. 0.3 W
¼
Without iPod charge
Specifi cations are subject to change without notice.
Some characters are not displayed on this unit due to the
restrictions of font data.
Since the internal memory includes area that contains management
information such as fi le system, the actual capacity that can be
used is less. Also, the memory capacity in general is calculated as
1 GB =1,000,000,000 bytes, however, on this unit, it is calculated as
1 GB = 1,024 × 1,024 × 1,024= 1,073,741,824 bytes. Therefore, the
displayed capacity is less than the general value.
Some characters are not displayed on this unit due to the
restrictions of font data.
Since the internal memory includes area that contains management
information such as fi le system, the actual capacity that can be
used is less. Also, the memory capacity in general is calculated as
1 GB =1,000,000,000 bytes, however, on this unit, it is calculated as
1 GB = 1,024 × 1,024 × 1,024= 1,073,741,824 bytes. Therefore, the
displayed capacity is less than the general value.
Auto power save: This unit is equipped with the Auto power save
function that automatically reduces the power consumption when
operations such as audio playback, media insertion/removal, etc.
are not performed approx. 10 minutes.
function that automatically reduces the power consumption when
operations such as audio playback, media insertion/removal, etc.
are not performed approx. 10 minutes.
The LCD display on the display part is made with high-precision
technology employed, but black dots may sometimes appear on the
LCD display or the display may always light (with red, blue and green
dots). This is not a malfunction. The pixels on the LCD display are
managed with more than 99.99% of high accuracy, however, the pixel
defi ciency may occur within 0.01% of probability. We assure you that
these dots are not recorded on the SD card or internal memory.
technology employed, but black dots may sometimes appear on the
LCD display or the display may always light (with red, blue and green
dots). This is not a malfunction. The pixels on the LCD display are
managed with more than 99.99% of high accuracy, however, the pixel
defi ciency may occur within 0.01% of probability. We assure you that
these dots are not recorded on the SD card or internal memory.
Maintenance
Unplug the AC power supply cord from the household AC outlet
and wipe it using a soft and dry cloth.
and wipe it using a soft and dry cloth.
When the dirt is heavy, wring water out of a wet cloth to wipe the
dirt and then wipe with a dry cloth.
Do not use solvents including benzine, thinner, alcohol, kitchen
detergent, etc. This might cause the exterior case to be deformed
or the coating to come off.
Before using chemically treated cloth, read the instructions that
come with the cloth carefully.
dirt and then wipe with a dry cloth.
Do not use solvents including benzine, thinner, alcohol, kitchen
detergent, etc. This might cause the exterior case to be deformed
or the coating to come off.
Before using chemically treated cloth, read the instructions that
come with the cloth carefully.
•
•
•
•
•
•
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
Company, Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
New Jersey 07094
http://www.panasonic.com
© Panasonic Corporation 2009
Printed in Malaysia
RQT9522-P_MW-10_P.indd 24
RQT9522-P_MW-10_P.indd 24
2009/08/28 19:13:14
2009/08/28 19:13:14