Motorola 438-470 MHz User Manual
2-2
6880904Z07-O
August, 1996
Intrinsically Safe Radio Information
GP350 Portable Radios Service Manual
Repair of FMRC Approved Products
Repair
A repair constitutes something done internally to the unit
that would bring it back to its original condition Approved by
FMRC. A repair should be done in an FMRC Approved facil-
ity.
that would bring it back to its original condition Approved by
FMRC. A repair should be done in an FMRC Approved facil-
ity.
Items not considered as repairs are those in which an action
is performed on a unit which does not require the outer cas-
ing of the unit to be opened in a manner which exposes the
internal electrical circuits of the unit. You do not have to be
an FMRC Approved Repair Facility to perform these actions.
is performed on a unit which does not require the outer cas-
ing of the unit to be opened in a manner which exposes the
internal electrical circuits of the unit. You do not have to be
an FMRC Approved Repair Facility to perform these actions.
Relabeling
The repair facility shall have a method by which the replace-
ment of FMRC Approval labels are controlled to ensure that
any relabeling is limited to units that were originally shipped
from the Manufacturer with an FM Approval label in place.
FMRC Approval labels shall not be stocked by the repair
facility. An FMRC Approval label shall be ordered from the
original manufacturer as needed to repair a specific unit.
Replacement labels may be obtained and applied by the
repair facility providing satisfactory evidence that the unit
being relabeled was originally an FMRC Approved unit. Ver-
ification may include, but is not limited to: a unit with a dam-
aged Approval label, a unit with a defective housing
displaying an Approval label, or a customer invoice indicat-
ing the serial number of the unit and purchase of an FMRC
Approved model.
ment of FMRC Approval labels are controlled to ensure that
any relabeling is limited to units that were originally shipped
from the Manufacturer with an FM Approval label in place.
FMRC Approval labels shall not be stocked by the repair
facility. An FMRC Approval label shall be ordered from the
original manufacturer as needed to repair a specific unit.
Replacement labels may be obtained and applied by the
repair facility providing satisfactory evidence that the unit
being relabeled was originally an FMRC Approved unit. Ver-
ification may include, but is not limited to: a unit with a dam-
aged Approval label, a unit with a defective housing
displaying an Approval label, or a customer invoice indicat-
ing the serial number of the unit and purchase of an FMRC
Approved model.
Do Not Substitute Options or Accessories
The communications equipment package that Motorola sub-
mits to FMRC for testing and approval is tested as a system
that consists of the communications unit itself and the bat-
tery, antenna and other options or accessories that make up
the rest of the package to be approved. This approved pack-
age must be strictly observed and there must be no substitu-
tion of items, even if the substitute you wanted to consider
appears as an approved accessory elsewhere in the Guide for
some other communications equipment unit. Approved con-
figurations are listed by FMRC Approved Product in the
annual Approval Guide published by FMRC. That guide, and
the Approval Standard Class Number 3605 document, can be
ordered from the following address.
mits to FMRC for testing and approval is tested as a system
that consists of the communications unit itself and the bat-
tery, antenna and other options or accessories that make up
the rest of the package to be approved. This approved pack-
age must be strictly observed and there must be no substitu-
tion of items, even if the substitute you wanted to consider
appears as an approved accessory elsewhere in the Guide for
some other communications equipment unit. Approved con-
figurations are listed by FMRC Approved Product in the
annual Approval Guide published by FMRC. That guide, and
the Approval Standard Class Number 3605 document, can be
ordered from the following address.
Training Resource Center
Publications-Order Processing Dept.
Factory Mutual Engineering and Research
1151 Boston-Providence Turnpike
PO Box 9102
Norwood, MA, 02062
telephone (617) 762-4300