Motorola 438-470 MHz User Manual
3-2
6880904Z07-O
August, 1996
Disassembly/Reassembly
GP350 Portable Radio Service Manual
Remove the Main Board
5.
Pull the chassis out and away from the housing as
shown by the arrow in Figure 3-5.
shown by the arrow in Figure 3-5.
Remove the Main Board
1.
The main board is sandwiched between the front
shield and the chassis. Four chassis clips hold the
sandwiched assembly together. Remove the chassis
gasket and place the radio shield side down on a
flat surface.
shield and the chassis. Four chassis clips hold the
sandwiched assembly together. Remove the chassis
gasket and place the radio shield side down on a
flat surface.
2.
Using a small flat blade screwdriver, unlock the
four chassis clips while pressing down on the chas-
sis directly above each clip. (Refer to Figure 3-6.)
four chassis clips while pressing down on the chas-
sis directly above each clip. (Refer to Figure 3-6.)
3.
After all four chassis clips have been removed,
separate the main board from the chassis as shown
in the exploded view Figure 3-7.
separate the main board from the chassis as shown
in the exploded view Figure 3-7.
Re-assembly of Radio
Reverse the disassembly
procedure.
IMPORTANT
Be sure to reinstall the chassis gasket. This
gasket helps keep the main board free of
gasket helps keep the main board free of
unwanted dirt, dust, and water.
MAEPF-25237-O
Flex Cable
Figure 3-5.
Chassis Clips
Figure 3-6.
Figure 1-7.
MAEPF-25239-O
Figure 3-7.