Alliance Laundry Systems TMB795C User Manual

Installation

M414905

To Reverse the Loading Door

A, H, S and U models after serial number

0308001307
The tumbler is delivered with a right hinged door, but

the door can be changed to a left hinged position.

1. Disconnect power supply to tumbler.
2. Unlock and remove control panel. Remove two

control assembly mounting screws from right

side. Swing open control to access upper flange

right guide lug assembly. Refer to Figure 6.

3. Remove lint panel.

IMPORTANT: Support door and hinge assembly

securely to prevent it from dropping once side

screws are removed from door hinge lug.

Figure 6

WARNING

To reduce the risk of electric shock, fire,

explosion, serious injury or death:

• Disconnect electric power to the

tumbler before servicing.

• Close gas shut-off valve to gas tumbler

before servicing.

• Close steam valve to steam tumbler

before servicing.

• Never start the tumbler with any guards/

panels removed.

• Whenever ground wires are removed

during servicing, these ground wires

must be reconnected to ensure that the

tumbler is properly grounded.

W002

TMB1994N

Control Assembly Mounting Screw

Control Assembly

Guide Lug Assembly

Side Screw

Screw

Lint Panel

Front Panel

Control Panel

TMB1994N