Haier RDE350AW User Manual
17
1. Turn the gas supply o by moving the shut-o valve to the closed position.
Closed Valve
Open Valve
A
B
2. Disconnect and discard old ß exible gas connector. Replace with a new
CSA(AGA) approved ß exible gas connector.
3. Remove the shipping cap from the gas inlet pipe at the rear of the dryer.
4. Connect a !" NPT elbow to the gas inlet pipe on the dryer. Then connect a ß are
adapter to the elbow.
IMPORTANT: Use a pipe wrench to keep the dryer gas inlet pipe from twisting.
Gas Inlet Pipe on
the Dryer
³⁄₈" NPT Elbow
³⁄₈" NPT Flare Adapter
A
B
C
5. Connect the dryer to the gas supply line with a ß exible gas connector.
Flexible Gas Connector
A
6. Tighten the ß exible gas connector using two adjustable wrenches.
7. Turn the gas supply on by moving the shut-o valve to the open position. The
valve is open when the handle is parallel to the gas pipe.