Amana W10150613B User Manual

To contact a qualified electrical installer.
To be sure that the electrical connection is adequate and in 

conformance with the Canadian Electrical Code, C22.1-latest 

edition and all local codes. A copy of the above codes 

standard may be obtained from: Canadian Standards 

Association, 178 Rexdale Blvd., Toronto, ON M9W 1R3 

CANADA.
To supply the required 4 wire, single phase, 120/240 volt, 

60 Hz., AC only electrical supply on a separate 30-amp circuit, 

fused on both sides of the line. A time-delay fuse or circuit 

breaker is recommended. Connect to an individual branch 

circuit.

This dryer is equipped with a CSA International Certified 

Power Cord intended to be plugged into a standard 14-30R 

wall receptacle. The cord is 5 ft (1.52 m) in length. Be sure wall 

receptacle is within reach of dryer’s final location.

Do not use an extension cord.

If you are using a replacement power supply cord, it is 

recommended that you use Power Supply Cord Replacement 

Part Number 3394208. For further information, please reference 

the service numbers located in the Dryer User Instructions.

  

For a grounded, cord-connected dryer: 

This dryer must be grounded. In the event of malfunction or 

breakdown, grounding will reduce the risk of electric shock 

by providing a path of least resistance for electric current. 

This dryer is equipped with a cord having an equipment-

grounding conductor and a grounding plug. The plug must 

be plugged into an appropriate outlet that is properly 

installed and grounded in accordance with all local codes 

and ordinances.

WARNING: 

Improper connection of the equipment-

grounding conductor can result in a risk of electric shock. 

Check with a qualified electrician or service representative 

or personnel if you are in doubt as to whether the dryer is 

properly grounded. Do not modify the plug provided with the 

dryer: if it will not fit the outlet, have a proper outlet installed 

by a qualified electrician.