Amana W10572490A - SP User Manual

Use to select available options for your dryer.

Use to lock the controls of the dryer and avoid  

an accidental change in cycle options or preferences 

during a drying cycle.
NOTE: The Control Lock function may be enabled 

when recovering from a power failure. To unlock the 

control, touch and hold CONTROL LOCK for at least  

3 seconds.

NOTE: The control panel features a sensitive surface that responds  

to a light touch of your finger. To ensure your selections are registered, 

touch the control panel with your finger tip, not your fingernail. When 

selecting a setting or option, simply touch its name.

Touch to turn the dryer on and off. Touch to stop/cancel  

a cycle at any time.  

Use your dryer’s cycle control knob to select available 

cycles on your dryer. Turn the knob to select a cycle for 

your laundry load. Automatic Cycles are Heavy Duty, 

Normal, and Delicates. Manual Cycles are Quick Dry and 

Time Dry. See “Cycle Guide” for detailed descriptions of 

cycles.

Touch and hold until the LED comes on to start a cycle,  

or touch once while a cycle is in process to pause it.

When you select a cycle, its default settings will light up 

and the Estimated Time Remaining (for Automatic Cycles) 

or actual time remaining (for Manual Cycles) will be 

displayed. For times longer than 99 minutes, hours  

will be displayed followed by minutes.
Touch TEMP or DRYNESS LEVEL to adjust cycle settings.

See “Cycle Guide” for available settings on each cycle. 

Not all settings are available with all cycles.

Touch “+” or “–” with Manual Cycles to increase or 

decrease the length of a Time Dry or Quick Dry cycle.
Temp

When using Manual Cycles, you may select a dry 

temperature based on the type of load you are drying. 

Use the warmest setting safe for the garments in the 

load. Follow garment label instructions.
NOTE: Automatic Cycles use a preset temperature that 

is not adjustable. 
Dryness Level

When using Automatic Cycles, you may select a 

Dryness Level based on the type of load you are drying.
NOTE: Dryness Level is for use with Automatic Cycles 

only. 
Cycle Status Lights

The indicator lights on the display will let you know 

cycle and dryer status. For more information, see 

“Cycle Status Indicators.”