Amana W10572490A - SP User Manual
7
CYCLE GUIDE — AUTOMATIC CYCLES
Heavyweight items
Heavy
High
More
45
Offers stepped drying starting with High heat
such as towels or
Duty
Normal
followed by Medium heat for enhanced fabric care
heavy work clothes
Less
and energy savings.
Work clothes, casual
Normal
Medium
More
38
Uses Medium heat to dry large loads of mixed
wear, mixed cottons,
Normal
fabrics and items. Normal is the preferred energy
sheets, corduroys
Less
cycle.
Undergarments, Delicates
Low
More
28
Uses Low heat to gently dry delicate items.
blouses, lingerie,
Normal
performance wear
Less
Items to dry:
Cycle:
Drying
Temperature:
Dryness
Level:
Default
Time:
Cycle Details:
Settings and options shown in
bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Load Size Recommendations
For best results, follow the wet load size recommendations noted
For best results, follow the wet load size recommendations noted
for each cycle.
Small load: Fill the dryer drum with 3–4 items,
not more than 1/4 full.
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not pack tightly. Items need to tumble freely.
Use Automatic Cycles for better fabric care and energy savings
The dryer senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Use the NORMAL dryness level to provide optimal energy savings.
CYCLE GUIDE — MANUAL CYCLES
Small loads and
Quick Dry
High
13 For small loads of 3–4 items.
sportswear
Medium
Low
Air Only
Any load
Time Dry
High
(the last
Use to dry items to a damp level for items that do not require an
NOTE: Select Air
Medium
Time Dry
entire drying cycle. Select a drying temperature based on the type
Only to dry foam,
Low
time set)
of fabrics in your load. If you are unsure of the temperature to select
rubber, plastic, or
Air Only
for a load, select the lower setting rather than the higher setting.
heat-sensitive
fabrics.
Items to dry:
Cycle:
Drying
Temperature:
Default
Time:
Cycle Details:
Settings and options shown in
bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items such as towels and work clothes.
A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear,
A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear,
permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.
Use a no heat (air dry) setting for foam, rubber, plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.