Sony HVL-MT24AM User Manual

HVL-MT24AM_GB  2-889-493-01 (1)

  This flash unit generates strong light, so it should not be used directly in front of 

the eyes.

  Do not store the macro flash controller with the alkaline batteries inside it. 

Leakage from the batteries may damage the battery chamber.

  Depending on the temperature or storage conditions, the battery level displayed 

may be lower than the actual battery capacity. The displayed battery level is 

restored to the correct value after the flash has been used a few times. When 

 lamp blinks to indicate that the flash cannot be used, pressing the flash 

ON/OFF button a number of times may result in restoration of the correct 

battery level display. If the battery level is still not restored, replace the battery.

  When using lithium batteries, if the batteries become hot due to high 

temperature or continuous use, 

 lamp may blink and the flash may not 

work for a while. Wait for the batteries to cool down before using the flash again.

  Nickel-metal hydride batteries can lose power suddenly. If 

 lamp starts 

blinking or the flash can no longer be used while taking pictures, change or 

recharge the batteries.

  The flash frequency and number of flashes provided by new batteries may 

vary from the values shown in the table, depending on the time elapsed since 

manufacture of the batteries.