ARRI 416 User Manual

Ñ for more than three seconds.

Once the on-screen display is activated by pressing the 

Enter/Insert key Ñ for more than three seconds, the 

following procedure is used to select and set all functions 

within the main menu and the sub menus:

•  Pressing the key Ê or Ë will move the cursor > up or 

down. Pressing the key Í or Ì activates sub menus.

•  Within sub menus the cursor > can be moved up and 

down again by pressing the key Ê or Ë. The keys Í 

or Ì will now change settings (e. g. switch the insertion 

of a user text window on and off), or activates functions 

(position mode of a window or EXIT).

•  If the windows position mode is activated, the keys Ê or 

Ë

 will move the window across the video image. To leave 

the position mode press the Enter/Insert key Ñ briefly.

•  To go from a sub menu back to the main menu, position 

the cursor > by using the keys Ê and Ë on the line 

EXIT and press the key Í or Ì.

•  Active lines are marked with a dash symbol –. 

They can be reached with the cursor > within a menu 

using the keys Ê and Ë. Lines may be visible but 

without a dash because the currently selected mode 

does not use this feature. E.g. when gain is not in 

manual control mode, the line value is not active 

because value cannot be changed in the automatic 

control mode. In this case, no dash symbol – is 

displayed and the line cannot be reached with the 

cursor >. To activate this line, switch from automatic to 

manual gain control mode.

Note: 

Pressing the Enter/Insert key Ñ for more than 

three seconds will cause the system to exit the 

on-screen programming mode completely, 

regardless of which menu is activated, with the 

exception of the positioning mode.