ARRI 416 User Manual

The IVS can store up to 5 sets of settings and recall them. The 

default values are a 6th set of settings. Thus it is possible to 

make all settings for e.g. indoor shooting and store them as 

setting 1. Shooting continues with some exterior scenes and 

the operator will make all settings for this and store them as 

setting 2. When the work is continued indoors, it is very easy 

to recall all the settings stored as setting 1 and get the same 

image appearance as before.

 

MENU LOAD/STORE 

 

-> - STORE SET      1     
      (CONFIRM BY

       ENTER)

   - LOAD SET       1 
      (NO UNDO)

   - SET ALL
      SETTINGS TO
      DEFAULT

 

   - EXIT

A set of settings consists of all set-ups in the IVS. Everything 

which can be set electronically, will be stored and recalled. 

All video adjustments such as manual gain control, white 

balance, flicker free, outputs with or without data and line 

interpolation as well as all inserter setups, e.g. user text insertion 

off or on, frame lines and so on are stored and recalled.

The adjustment of the white level of the inserted data, an 

inverse display and a fine adjustment of the vertical position 

is described in chapters 10.4.5 White Level, Inverse and 

Fine Positioning.

•  Enter the Load/Store submenu from the main menu.

The set of settings, that are currently active, can be stored 

as one out of five settings.

•  Move the cursor > with the Ê and Ë keys to the line 

– STORE SET. Pressing the Í key will switch from 1 to 2 

all the way up to 5 and then back to 1, the Ì key will 

step in the opposite direction.