JVC 0104-FO-ID-PJ User Manual

MasterPage: Left

  

Some Wipe/Fader Effects cannot be used with certain modes 
of Program AE with special effects. (See the right column) If 
an unusable Wipe/Fader Effect is selected, its indicator blinks 
in blue or goes out.

These effects let you make pro-style scene transitions. 
Use them to spice up the transition from one scene to the 
next.

Wipe or Fader works when video recording is started or 
stopped.

Set the VIDEO/MEMORY Switch to “VIDEO”.

Set the Power Switch to “M” while pressing down the 

Lock Button located on the switch.

Open the LCD monitor fully. (

Set “v” to the desired mode. (

● The WIPE/FADER menu disappears and the effect is 

reserved.

● The selected effect indicator appears.

Press the Recording Start/Stop Button to activate the 

Fade-in/out or Wipe-in/out.

To deactivate the selected effect
Select “OFF” in step 

4. The effect indicator disappears.

You can extend the length of a Wipe or Fader by pressing and 
holding the Recording Start/Stop Button.

OFF: Disables the function. (Factory-preset)

 FADER–WHITE: Fade in or out with a white 

screen. 

 FADER–BLACK: Fade in or out with a black 

screen.

 FADER–B.W: Fade in to a color screen from a 

black and white screen, or fade out from color to black 
and white.

 WIPE–CORNER: Wipe in on a black screen from 

the upper right to the lower left corner, or wipe out from 
lower left to upper right, leaving a black screen.

 WIPE–WINDOW: The scene starts in the center of 

a black screen and wipes in toward the corners, or 
comes in from the corners, gradually wiping out to the 
center.

 WIPE–SLIDE: Wipe in from right to left, or wipe out 

from left to right.

 WIPE–DOOR: Wipe in as the two halves of a black 

screen open to the left and right, revealing the scene, or 
wipe out and the black screen reappears from left and 
right to cover the scene.

 WIPE–SCROLL: The scene wipes in from the 

bottom to the top of a black screen, or wipes out from top 
to bottom, leaving a black screen.

 WIPE–SHUTTER: Wipe in from the center of a 

black screen toward the top and bottom, or wipe out from 
the top and bottom toward the center leaving a black 
screen.

Some modes of Program AE with special effects cannot be 
used with certain Wipe/Fader effects. (See the left column) If 
an unusable mode is selected, the indicator of Program AE 
with Special Effects blinks or goes out.

Set the Power Switch to “M” while pressing down the 

Lock Button located on the switch.

Open the LCD monitor fully. (

Set “r” to the desired mode. (

● The PROGRAM AE menu disappears and the selected 

effect is activated.

● The selected effect indicator appears.

To deactivate the selected effect
Select “OFF” in step 

3. The effect indicator disappears.

● Program AE with special effects can be changed during 

recording or during Record-Standby.

● Some modes of Program AE with special effects cannot be 

used during Night-Alive.

OFF: Disables the function. (Factory-preset)

 SHUTTER 1/60: The shutter speed is fixed at 1/

60th of a second. Black bands that usually appear when 
shooting a TV screen become narrower. 

 SHUTTER 1/100: The shutter speed is fixed at 1/

100th of a second. The flickering that occurs when 
shooting under a fluorescent light or mercury-vapor lamp 
is reduced.

MMENU/VOL.

GR-D94US.book  Page 30  Monday, November 17, 2003  2:12 PM