Ricoh 06578 User Manual

112

Appendix

• The SD Memory Card is

equipped with a write-protect

switch. Setting the switch to

LOCK prevents new data from

being recorded on the card, the

stored data from being deleted,

and the card from being

formatted by the camera or

computer.

• The SD Memory Card may be

hot when removing the card immediately after using the camera.

• Do not remove the SD Memory Card or turn off the power while the card

is being accessed. This may cause the data to be lost or the card to be

damaged.

• Do not bend the SD Memory Card or subject it to violent impact. Keep it

away from water and store away from high temperatures.

• Do not remove the SD Memory Card while formatting. The card may be

damaged and become unusable.

• Data on the SD Memory Card may be deleted in the following

circumstances. We do not accept any liability for data that is deleted if

1.the SD Memory Card is mishandled by the user.

2.the SD Memory Card is exposed to static electricity or electrical

interference.

3.the SD Memory Card has not been used for a long time.

4.the SD Memory Card or the battery is removed while the card is being

accessed.

• If the SD Memory Card is not used for a long time, the data on the card

may become unreadable. Be sure to regularly make a backup of

important data on a computer.

• Format new SD Memory Cards. Also format SD Memory Cards

previously used with other cameras.

• Please note that deleting data stored on an SD Memory Card, or

formatting an SD Memory Card does not completely erase the original

data. Deleted data can sometimes be recovered using commercially

available software. If you are going to discard, give away or sell your SD

Memory Card, you should ensure that the data on the card is completely

deleted or the card itself is destroyed if it contains any personal or

sensitive information.

• The data on your SD Memory Card should be managed at your own risk.

• An SD Memory Card with a built-in wireless LAN (“Eye-Fi card”) can be

used with this camera.

• Use of an access point and an Internet connection are required for

transferring images via wireless LAN. For details, refer to the Eye-Fi

website. (http://www.eye.fi)

• Update your Eye-Fi card to the latest firmware before using it.

• Set [Action Mode] to [OFF], or do not use an Eye-Fi card in a location

where the use of wireless LAN devices is restricted or prohibited, such

as airplanes.

• Eye-Fi cards can be used only in the country in which the card was

purchased. Please observe all local laws governing the Eye-Fi card

usage.

• This camera features a function to enable/disable the communication

function of the Eye-Fi card, however, we do not guarantee the operability

of all Eye-Fi card functions.

• Refer to the Eye-Fi card manual for details on how to use the card.

• Please contact the Eye-Fi card manufacturer regarding any

malfunctions or problems concerning Eye-Fi cards.

Microsoft, Windows and Windows Vista are registered trademarks of

Microsoft Corporation in the United States of America and other countries.

Macintosh, Mac OS, OS X, and QuickTime are trademarks of Apple Inc.,

registered in the U.S. and other countries.

Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/or

other countries.

SDXC Logo is a trademark of SD-3C, LLC.

Eye-Fi, the Eye-Fi logo and Eye-Fi connected are trademarks of Eye-Fi,

Inc.

This product includes DNG technology under license by Adobe Systems

Incorporated.

The DNG logo is either a registered trademark or trademark of Adobe

Systems Incorporated in the United States and/or other countries.

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing, LLC in the United

States and/or other countries.

About SD Memory Cards

Write-protect

switch

About Eye-Fi Cards

Trademarks

e_kb558_om.book Page 112 Tuesday, September 16, 2014 11:59 AM