SVAT Electronics CLEARVU4 User Manual

now you can see

CLEARVU4

15

• 

Press the “UP/ DOWN/ LEFT/ RIGHT” buttons to drag the window and set 

the ending point of the detection area. 

• 

Press the “ENTER” button to confirm the ending point of the detection area.

3.   Sensitivity: The blue bar shown on the Motion Detection screen indicates 

the motion variation of the detection window. When the amount of motion 

detected exceeds the preset sensitivity threshold, it triggers motion 

detection recording. For example, if there is slight movement in your 

camera’s view (e.g. curtains blowing, shadows) you can decrease the 

sensitivity of that camera channel to avoid false triggering of motion record.

1.  QUALITY: LOW/ MEDIUM/ HIGH
2. 

AUDIO:

 

•   ON: Audio recording enabled.

 

•   OFF: Audio recording disabled.

3. 

DISK FULL: 

 

•   Overwrite: When the hard disk is full the system overwrites your oldest  

    recorded footage (recommended).

 

•   Stop: When the hard disk is full the system stops recording (message will 

 

   be displayed).

4.  POST ALARM: Recording time after an event (Alarm/ Motion Detection) has 

been triggered. 

5.  MANUAL: Set frames per second (FPS) for manual recording.

6.  CONTINUOUS: Set FPS for schedule continuous recording.

7.  MOTION DETECT: Set FPS for schedule motion detection recording.

8.  ALARM: Set FPS for schedule alarm recording (if you have alarm sensors 

wired into the DVR).

9.  DEFAULT: Reload the factory default setting.