Panasonic DMC-GF1C User Manual
173
VQT2G44
Others
[CANNOT BE SET ON THIS PICTURE]
•
[TITLE EDIT], [TEXT STAMP] or [PRINT SET] cannot be set for pictures not based on the
DCF standard.
DCF standard.
[MEMORY CARD ERROR
FORMAT THIS CARD?]
FORMAT THIS CARD?]
•
This card has a format which is not recognized by the camera.
> Format the card again with the camera after saving necessary data on a PC etc. (P36)
[PLEASE CHECK THAT THE LENS IS ATTACHED CORRECTLY]/[PLEASE CHECK
THE STATUS OF A LENS.]
THE STATUS OF A LENS.]
•
Do not press the lens release button.
•
Check that the lens is attached correctly and then turn the camera off and on.
> If the message persists, contact the dealer or your nearest Service Center.
•
When using a Leica lens mount adaptor (DMW-MA2M or DMW-MA3R; optional), set
[SHOOT W/O LENS] (P128) to [ON] in the custom menu.
[SHOOT W/O LENS] (P128) to [ON] in the custom menu.
[THE LENS IS NOT ATTACHED PROPERLY.]
•
Detach the lens and then attach it again. (P17)
[MEMORY CARD PARAMETER ERROR]/[THIS MEMORY CARD CANNOT BE USED]
> Use a card compatible with this unit. (P25)
•
You can only use an SDHC Memory Card if using cards with 4 GB or more capacity.
[INSERT SD CARD AGAIN]/[TRY ANOTHER CARD]
•
An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[READ ERROR/WRITE ERROR
PLEASE CHECK THE CARD]
PLEASE CHECK THE CARD]
•
It has failed to read or write data.
> Remove the card after turning the power [OFF]. Insert the card again, turn the power on,
and try to read or write the data again.
•
The card may be broken.
> Insert a different card.
[CANNOT RECORD DUE TO INCOMPATIBLE FORMAT (NTSC/PAL) DATA ON THIS
CARD.]
CARD.]
> If you want to delete some pictures, format the card after saving necessary data on a PC
etc. (P36)
> Insert a different card.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
WRITING SPEED OF THE CARD]
•
It is recommended to use a card with SD Speed Class
¢
with “Class 6” or higher when
recording motion pictures.
¢ SD speed class is the speed standard regarding continuous writing.
•
When you set the picture quality to [
], [
] or [
], we recommend using a high-speed
card with “10MB/s” or greater displayed on the package.
•
In the event that it stops even after using a “10MB/s” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format (P36).
deteriorated so it is recommended to make a backup and then format (P36).
•
Depending on the type of SD Memory Card or SDHC Memory Card, motion picture recording
may stop in the middle.
may stop in the middle.
DMC-GF1KPP-VQT2G44_eng.book 173 ページ ２００９年８月１７日 月曜日 午後１時１９分