Panasonic DMC-GF1C User Manual
VQT2G44
174
Others
[THIS CARD IS NOT FORMATTED WITH THIS CAMERA, AND NOT SUITABLE FOR
MOVIE RECORDING.]
MOVIE RECORDING.]
•
The writing speed is lower if the card has been formatted using a PC or other equipment. As a
consequence, motion picture recording may stop in the middle. If this happens, make a
backup of the data and format (P36) the card in this unit.
consequence, motion picture recording may stop in the middle. If this happens, make a
backup of the data and format (P36) the card in this unit.
[A FOLDER CANNOT BE CREATED]
•
A folder cannot be created because there are no remaining folder numbers that can be used.
(P154)
(P154)
> Format the card after saving necessary data on a PC etc. (P36) If you execute
[NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100.
(P34)
(P34)
[PICTURE IS DISPLAYED FOR 16:9 TV]/[PICTURE IS DISPLAYED FOR 4:3 TV]
•
The AV cable is connected to the camera.
> Press [MENU/SET] if you want to delete this message at once.
> Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect. (P35)
•
This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer. (P153,
155)
In this case, connect the other end of the USB connection cable to a PC or a printer. (P153,
155)
[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]
•
The printer cannot print.
> Check the printer.
[NO BATTERY POWER REMAINS]
•
The remaining battery power is low.
> Charge the battery.
[THIS BATTERY CANNOT BE USED]
•
The battery cannot be recognized by the camera.
> Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or your nearest Service Center.
•
The battery cannot be recognized as its terminal is dirty.
> Remove any dirt etc. from the terminal.
DMC-GF1KPP-VQT2G44_eng.book 174 ページ ２００９年８月１７日 月曜日 午後１時１９分