Panasonic DMC-GF1C User Manual
25
VQT2G44
Preparation
Note
•
Remove the battery after use.
•
Do not remove the battery while the power is on as the settings on the camera may not be stored properly.
•
The supplied battery is designed only for the camera. Do not use it with any other equipment.
•
Before removing the card or battery, turn the camera off, and wait until the status indicator has
gone off completely. (Otherwise, this unit may no longer operate normally and the card itself
may be damaged or the recorded pictures may be lost.)
gone off completely. (Otherwise, this unit may no longer operate normally and the card itself
may be damaged or the recorded pictures may be lost.)
About the Card
Access to the card
The access indication lights red when pictures are being recorded
on the card.
The access indication lights red when pictures are being recorded
on the card.
The following types of cards can be used with this unit.
(These cards are indicated as card in the text.)
(These cards are indicated as card in the text.)
¢ The SDHC Memory Card is a memory card standard decided by the SD Association in 2006
for high capacity memory cards more than 2 GB.
¢ You can use an SDHC Memory Card in equipment that is compatible with SDHC Memory Cards
however you cannot use an SDHC Memory Card in equipment that is only compatible with SD
Memory Cards. (Always read the operating instructions for the equipment being used.)
Memory Cards. (Always read the operating instructions for the equipment being used.)
•
You can only use cards with SDHC logo (indicating compliance with the SD standard) if using
cards with 4 GB or more capacity.
cards with 4 GB or more capacity.
•
It is recommended to use a card with SD Speed Class
¢
with “Class 6” or higher when recording motion pictures.
¢ SD speed class is the speed standard regarding continuous writing.
•
Please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Note
•
Do not turn off the power or remove the battery, card, or the DC cable (DMW-DCC3; optional) (when
the AC adaptor is in use), while the access indicator is lit, while writing, reading, or deleting the
picture, formatting (P36), etc. Also, do not apply vibration, shock, or static electricity to the unit.
The card or the data on the card may be damaged, and this unit may no longer operate normally.
If operation fails due to vibration, impact or static electricity, perform the operation again.
the AC adaptor is in use), while the access indicator is lit, while writing, reading, or deleting the
picture, formatting (P36), etc. Also, do not apply vibration, shock, or static electricity to the unit.
The card or the data on the card may be damaged, and this unit may no longer operate normally.
If operation fails due to vibration, impact or static electricity, perform the operation again.
•
The data on the card may be damaged or lost due to electromagnetic waves, static electricity or
breakdown of the camera or the card. We recommend storing important data on a PC etc.
breakdown of the camera or the card. We recommend storing important data on a PC etc.
•
Do not format the card on your PC or other equipment. Format it on the camera only to ensure proper operation. (P36)
•
Keep the Memory Card out of reach of children to prevent swallowing.
Card
Type of card
Characteristics
SD Memory Card (8 MB to 2 GB)
(Formatted using the FAT12 or FAT16
format in compliance with the SD
standard)
(Formatted using the FAT12 or FAT16
format in compliance with the SD
standard)
•
Fast recording and writing speed
•
Write-Protect switch
A provided (When
this switch is set to the [LOCK] position,
no further data writing, deletion or
formatting is possible. The ability to
write, delete and format data is restored
when the switch is returned to its
original position.)
no further data writing, deletion or
formatting is possible. The ability to
write, delete and format data is restored
when the switch is returned to its
original position.)
SDHC Memory Card
(4 GB to 32 GB)
¢
(Formatted using the FAT32 format in
compliance with the SD standard)
compliance with the SD standard)
2
A
DMC-GF1KPP-VQT2G44_eng.book 25 ページ ２００９年８月１７日 月曜日 午後１時１９分