Panasonic DMC-GF1C User Manual
VQT2G44
26
Preparation
Setting Date/Time (Clock Set)
•
The clock is not set when the camera is shipped.
Turn the camera on.
A [MENU/SET] button
Press [MENU/SET].
Press
2/1 to select the items (year, month,
day, hour, minute, display sequence or time
display format), and press
display format), and press
3/4 to set.
A: Time at the home area
B: Time at the travel destination (P113)
‚: Cancel without setting the clock.
B: Time at the travel destination (P113)
‚: Cancel without setting the clock.
•
Select either [24HRS] or [AM/PM] for the time display
format.
format.
•
AM/PM is displayed when [AM/PM] is selected.
•
When [AM/PM] is selected as the time display format, midnight is displayed as
AM 12:00 and noon is displayed as PM 12:00. This display format is common in the US
and elsewhere.
AM 12:00 and noon is displayed as PM 12:00. This display format is common in the US
and elsewhere.
Press [MENU/SET] to set.
•
Turn the camera off after finishing setting the clock. Then turn it on and check that the
clock setting is correct.
clock setting is correct.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
been set, set the clock correctly by following the
“
Changing the clock setting
”
procedure below.
Select [CLOCK SET] in the [SETUP] menu, and press
1. (P28)
•
It can be changed in steps
3
and
4
to set the clock.
•
Once a charged battery has been installed for 24 hours, the clock setting is maintained
for 3 months using the built-in clock battery even without the battery.
for 3 months using the built-in clock battery even without the battery.
Note
•
The clock is displayed when [DISPLAY] is pressed several times during recording.
Changing the clock setting
ON
OFF
MENU
/SET
:
:
:
DMC-GF1KPP-VQT2G44_eng.book 26 ページ ２００９年８月１７日 月曜日 午後１時１９分