Panasonic DMC-L10K User Guide

Page of 160
Others
126
VQT1G28
• If you use commercially available external 
flashes with communication functions 
other than the dedicated one, they may 
not operate normally or they may be 
damaged. Do not use them.
• Even if the external flash is turned off, 
the camera may enter the external flash 
mode when the external flash is 
attached. When you are not using the 
external flash, detach it.
• When attaching the external flash, the 
built-in flash cannot be activated.
• Do not open the built-in flash when an 
external flash is attached.
• When attaching the external flash, the 
camera will become unstable.
• Detach the external flash when carrying 
the camera.
• When attaching the external flash, do not 
hold only the external flash because it 
may detach from the camera.
• If you use the external flash when the 
white balance is set to [
] (Flash) finely 
adjust the white balance depending on the 
picture quality. (P77)
• If you take pictures close to the subject in 
Wide, the vignetting effect may appear on 
the bottom of the recorded picture.
• Read the operating instructions of the 
external flash for details.
Using the MC 
Protector/PL Filter
The MC protector is a transparent filter 
which affects neither the colors nor the 
amount of light, so it can always be used to 
protect the camera’s lens. Also, the PL filter 
reduces diffused light reflection so you can 
take pictures with increased contrast.
1 Detach the lens cap.
2 Attach the MC protector A or the 
PL filter 
B.
• You cannot attach the MC protector and 
the PL filter at the same time.
• If the MC protector/PL filter are tightened 
too much, you may not be able to remove 
them. Do not tighten them too much.
B
A
VQT1G28ENG_L10KP.book  126 ページ  2007年9月6日 木曜日 午前9時29分