Panasonic DMC-FX2GN User Manual

Page of 104
Recording pictures (basic)
43
Taking Pictures using Burst Mode
1 Press the Single/Burst Mode 
Button to switch the burst mode 
setting and then take pictures. 
: High speed
;
: Low speed
;
: No  limit
;
No display (cancelled)
∫ Number of pictures recorded in burst 
mode
¢When the shutter speed is higher than 
1/60 and the flash is not activated
• In simple mode [
]  (P31), the burst 
speed is fixed to Low.
• Keep pressing the shutter button fully to 
activate the burst mode.
• If the flash is activated, you can record 
only 1 picture.
• When the self-timer is used, the number 
of recordable pictures in burst mode is 
fixed to 3.
• When the burst mode is activated, the 
audio recording function on DMC-FX7 
cannot be used.
• When setting auto bracket and the burst 
mode simultaneously, auto bracket will be 
performed by default.
• When the burst mode setting is set to no 
limit, the speed of taking pictures becomes 
slow during a recording in burst mode.
• Burst mode will not perform as described 
if a MultiMediaCard is used in place of an 
SD Memory Card. The reading/writing 
speed of a MultiMediaCard is slower than 
that of an SD Memory Card.
• The setting of auto review function is fixed 
to [1SEC.]. (The picture is not enlarged.)
• Burst mode is not cancelled when the 
camera is switched off.
1600
19
Burst speed
(pictures/
second)
¢
Number of recordable 
pictures (pictures)
DMC-FX7:
3
DMC-FX2:
4
DMC-FX7:
max. 4
DMC-FX2:
max. 5
DMC-FX7:
max. 7
DMC-FX2:
max. 10
2
2
Depends on 
the card 
capacity
Depends on 
the card 
capacity
FX2_7-GN.book  43 ページ  2004年8月2日 月曜日 午後3時40分