Panasonic DMC-LZ3 User Manual

Connecting to other equipment

82

VQT0U87

• Do not use any other USB connection 

cables except the supplied one.

• Do not disconnect the USB connection 

cable while [ACCESS] is displayed.

• If battery power is exhausted while the 

camera and the PC are communicating, 
the recorded data may be damaged. Use 
batteries with sufficient battery power 
(P13) or the AC adaptor (DMW-AC6; 
optional) when you connect the camera to 
the PC.

• If the remaining battery power becomes 

low while the camera and the PC are 
communicating, the status indicator blinks 
and the alarm beeps. In this case, stop 
the communication at once on the PC.

• For information about this, refer to the 

separate operating instructions for PC 
connection.

• Read the operating instructions for the 

PC.

• If a card is not inserted when the camera 

is connected to the PC, you can edit or 
access the pictures on the built-in 
memory. If a card is inserted, you can edit 
or access the pictures on it.

• You cannot switch between the built-in 

memory and the card while the camera is 
connected to the PC. When you want to 
switch between the built-in memory and 
the card, disconnect the USB connection 
cable, insert (or remove) the card and 
then connect the USB connection cable to 
the PC again.

By connecting the camera directly to a 
printer supporting PictBridge via the USB 
connection cable (supplied), you can select 
the pictures to print and start printing on the 
camera’s screen.
Set print settings such as the print quality 
on the printer beforehand. (Read the printer 
operating instructions.)

A: USB connection cable (supplied)
B: AC adaptor (DMW-AC6; optional)
• It may take time to print some pictures. 

Use batteries with sufficient battery power 
(P13) or the AC adaptor (DMW-AC6; 
optional) when you connect to a printer.

• Turn the camera off before inserting or 

removing the cable for the AC adaptor 
(DMW-AC6; optional).

A 

VQT0U87ENG.book  82 ページ  ２００５年１２月２７日　火曜日　午後７時１２分