Panasonic DMC-LS85 User Manual

VQT1X05

By connecting the camera directly to a printer supporting PictBridge via the USB connection 

cable (supplied), you can select the pictures to be printed or start printing on the LCD monitor.
Preparations:

Turn on the camera and the printer.

Remove the card before printing the pictures in the built-in memory.

Perform the print quality and other settings at the printer before printing the pictures.

  Connect the camera to a printer via the USB connection cable A (supplied).

• Do not use any other USB connection cables except the supplied one.

A

B

A

  USB connection cable (supplied)

• Check the directions of the connectors, and plug them straight in or unplug them straight 

out. (Otherwise the connectors may be bent out of shape which will cause trouble.)

B

  Align the marks, and insert.

• Use batteries with suffi cient battery power or the AC adaptor (optional: P103) and DC 

coupler (optional: P103). If the remaining battery power becomes low while the camera 

and the printer are connected, the status indicator blinks and the alarm beeps. If this 

happens during printing, stop printing at once. If not printing, disconnect the USB 

connection cable.

• Always use a genuine Panasonic AC adaptor (DMW-AC6PP: optional) and DC coupler 

(DMW-DCC2: optional).

• When the camera is connected to the printer, the cable disconnect prohibit icon [1] 

appears. Do not disconnect the USB connection cable while [1] is displayed.

USB MODE

PLEASE SELECT 

THE USB MODE 

 Press e/r to select [PictBridge(PTP)], and then 

• We recommend placing a soft cloth under this unit to prevent scratching.

• Turn the camera off before connecting or disconnecting the AC adaptor (optional: P103).

• Before inserting or removing a card, turn the camera off, and disconnect the USB 

connection cable.

• You cannot switch between the built-in memory and the card while the camera is 

connected to the printer. Disconnect the USB connection cable, insert (or remove) the 

card and then connect the USB connection cable to the printer again.

VQT1X05_DMC-LS85_P-PC_EN.indb   77

VQT1X05_DMC-LS85_P-PC_EN.indb   77

2008/12/22   20:20:31

2008/12/22   20:20:31