Panasonic DMC-TS1 User Manual

Page of 160
19
VQT1Z45
Preparation
Inserting and Removing the Card (optional)/the 
Battery
Check that this unit is turned off.
Confirm that there is no foreign object. (P10)
We recommend using a Panasonic card.
Slide the release lever in the direction of 
the arrow and open the card/battery door.
Always use genuine Panasonic batteries 
(DMW-BCF10PP).
If you use other batteries, we cannot guarantee 
the quality of this product.
Battery: Insert until it is locked by the 
lever 
A being careful about the direction 
you insert it. Pull the lever 
A in the 
direction of the arrow to remove the 
battery.
Card: Push it fully until it clicks being 
careful about the direction you insert it. 
To remove the card, push the card until it 
clicks, then pull the card out upright.
B: Do not touch the connection terminals of the 
card.
The card may be damaged if it is not fully inserted.
Close the card/battery door until it clicks.
If the card/battery door cannot be completely 
closed, remove the card, check its direction and 
then insert it again.
Confirm that the red part on the 
release lever
 is not 
showing.
Note
Remove the battery after use. Store the removed battery in the battery case (supplied).
Do not remove the battery until the LCD monitor and the status indicator (green) turn off as the 
settings on the camera may not be stored properly.
The supplied battery is designed only for the camera. Do not use it with any other equipment.
Before removing the card or battery, turn the camera off, and wait until the status indicator has 
gone off completely. (Otherwise, this unit may no longer operate normally and the card itself 
may be damaged or the recorded pictures may be lost.)
VQT1Z45~_eng.book  19 ページ  2009年1月28日 水曜日 午後9時30分