Panasonic DMC-TS1 User Manual

VQT1Z45

[REC] mode: 

·

¿

In this mode, 3 pictures are automatically recorded in the selected exposure 
compensation range each time the shutter button is pressed. You can select the picture 
with the desired exposure from the 3 pictures with different exposures.

d1 EV

•

When setting auto bracket, [

] appears on the screen.

•

When taking pictures using auto bracket after setting the exposure compensation range, the 
pictures taken are based on the selected exposure compensation range.
When the exposure is compensated, the exposure compensation value appears on the lower 
left of the screen.

•

The auto bracket setting is canceled if you turn the camera off or [AUTO POWER OFF] is 
activated.

•

When auto bracket is set, the auto review function is activated regardless of the auto review 
setting. (The picture is not enlarged.) You cannot set the auto review function in the [SETUP] 
menu.

•

The exposure may not be compensated with auto bracket depending on the brightness of the 
subject.

[Œ] is set for the flash when auto bracket is set.

•

Setting of the auto bracket cannot be performed in the following conditions:

–

In [TRANSFORM], [PANORAMA ASSIST], [HI-SPEED BURST], [FLASH BURST], 
[STARRY SKY], [PIN HOLE] and [FILM GRAIN] in scene mode

–

When recording motion pictures

 

 

 

d0 EV

j1 EV

i1 EV

3 [È] until [AUTO BRACKET] appears, set 

2/1.

•

When you do not use auto bracket, select [OFF] (0).

•

You can also press the shutter button halfway to finish.

VQT1Z45~_eng.book  56 ページ  ２００９年１月２８日　水曜日　午後９時３０分