Panasonic DMC-TZ10 User Manual

Page of 178
108   
VQT2R48
VQT2R48
   109
For [MOTION PICTURE] menu setting procedures (→20)
Using the [MOTION PICTURE] menu
 
Settings:
[AVCHD Lite(GPS REC)] in [REC MODE]
Setting
Resolution
Bit rate
1
Aspect ratio
[GSH]
1280 x 720
17 Mbps
16:9
[GH]
1280 x 720
13 Mbps
[GL]
1280 x 720
9 Mbps
[AVCHD Lite] in [REC MODE]
Setting
Resolution
Bit rate
1
Aspect ratio
[SH]
1280 x 720
17 Mbps
16:9
[H]
1280 x 720
13 Mbps
[L]
1280 x 720
9 Mbps
[MOTION JPEG] in [REC MODE]
Setting
Resolution
Frame rate
2
Aspect ratio
[HD]
1280 x 720
30 fps
16:9
[WVGA]
848 x 480
30 fps
[VGA]
640 x 480
30 fps
4:3
[QVGA]
320 x 240
30 fps
1
  The bit rate is the amount of data per unit time. A higher value translates into a higher image 
quality. This camera uses the VBR (Variable Bit Rate) recording system and the available 
recording time is shorter when recording a subject with rapid movements.
2
 The frame rate is the number of frames per second.
 
[WVGA] cannot be set in [INTELLIGENT AUTO] Mode.
 
[QVGA] only can be recorded to the built-in memory.
 
 [CONTINUOUS AF]
Either allow the focus to be constantly adjusted during motion picture recording, or fix the 
focus position at the start of recording.
 
Recording Mode: 
 
 
 
 
 
 
 
Settings: [ON]  :  Adjust focus according to movement of subject during motion picture 
recording. (
 appears on the screen.)
[OFF] :  Fix focus position at the start of motion picture recording.
           Use this setting to keep the same focus position for subjects with 
little forward/backward movement.
 
The setting is fixed to [OFF] in [STARRY SKY] and [FIREWORKS] Scene Modes.
   [WIND CUT]
Reduces recording of wind sounds (wind noise) when recording in a strong wind
 
Recording Mode: 
 
 
 
 
 
 
 
Settings: [OFF]/[ON] (
 appears on the screen.)
 
When [WIND CUT] is set to [ON], lower sounds will be eliminated and the sound quality 
will differ from that of normal recordings.
 
For [MOTION PICTURE] menu setting procedures (→20)
 
‘Quick menu’ (→112) is useful to easily call up frequently-used menus.
 
 [REC MODE]
Sets the data format of the motion picture that is recorded.
 
Recording Mode: 
 
 
 
 
 
 
 
 
Settings:
Recording format
Effect
  [AVCHD Lite(GPS 
REC)]∗
These are AVCHD Lite motion pictures to which location name 
information from the start of recording has been added.
 [AVCHD Lite]∗
This is a data format suitable for playback on high-definition TVs.
 [MOTION JPEG]
This is a data format suitable for playback on computers that allows 
even small picture sizes to be recorded. Location name information 
from the start of recording can also be recorded.
∗  When the term “AVCHD Lite motion picture” is used in this manual, it means a motion picture 
recorded in [AVCHD Lite(GPS REC)] or [AVCHD Lite].
 
The [REC QUALITY] options vary based on the setting.
 
If a card is not loaded in the camera, the motion picture is automatically recorded in [MOTION 
JPEG] ([REC QUALITY]: [QVGA]).
 
Even when devices are compatible with motion pictures recorded with this camera, the playback 
may have poor picture or sound quality, or playback may not be possible. Also, the recording 
information may not be displayed properly. In this case, use this unit.
For details on AVCHD compatible devices, refer to the support sites below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
 
AVCHD Lite motion pictures cannot be played back on devices not compatible with AVCHD (such as 
conventional DVD recorders). Also, motion pictures recorded in [AVCHD Lite(GPS REC)] cannot be 
played back with Panasonic digital cameras (LUMIX) compatible with AVCHD (Lite) recording that 
were sold in or before 2009.
 
If positioning fails and location name information is not saved, the location name information is not 
recorded.
 
Because AVCHD Lite motion pictures do not conform to DCF and Exif, some information (such as 
picture number, White Balance, etc.) is not displayed during playback.
 
Using a card of SD speed ‘Class 4’∗ or above is recommended for recording motion pictures in 
[AVCHD Lite(GPS REC)]/[AVCHD Lite].
Using a card of SD speed ‘Class 6’∗ or above is recommended for recording motion pictures in 
‘MOTION JPEG’.
∗ The SD speed class is a speed rating for continuous writing.
 
To play back AVCHD Lite motion pictures using a computer, please use the ‘PHOTOfunSTUDIO’ 
software on the CD-ROM supplied.
   [REC QUALITY]
Sets the picture quality of the motion picture that is recorded.
 
Recording Mode: 
 
 
 
 
 
 
 
downloadlike
ArtboardArtboardArtboard
Report Bug