Panasonic DMC-FZ10GN User Manual
Playback (advanced)
107
Connecting to a PC (Mass Storage)
1
Turn the camera on and then set
[USB MODE] to [Mass Storage].
(P105)
[USB MODE] to [Mass Storage].
(P105)
2
Connect the camera to a PC via
the USB connection cable
(supplied).
the USB connection cable
(supplied).
[Windows]
The drive appears on the
[My Computer] folder.
• If it is the first time for you to
The drive appears on the
[My Computer] folder.
• If it is the first time for you to
connect the camera to a PC, the
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then it appears on
the [My Computer] folder.
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then it appears on
the [My Computer] folder.
[Macintosh]
The drive is shown on the screen.
The drive is shown on the screen.
¬Suggestions/Tips ¬
• When connecting to a PC, we
recommend using the AC adaptor as
the power source.
the power source.
• If the remaining battery power
becomes low during communication,
the power indicator blinks and the
alarm beeps. In this case, stop the
communication. Then turn the camera
off and charge the battery.
the power indicator blinks and the
alarm beeps. In this case, stop the
communication. Then turn the camera
off and charge the battery.
• When connecting to a PC, pictures
and sounds are not output from the
[A/V OUT] socket.
[A/V OUT] socket.
• Use the supplied USB connection
cable only.
A/V
OUT
USB
ACCESS
FZ10-GN.book 107 ページ ２００３年１２月２４日 水曜日 午前１０時３９分