Panasonic DMC-FZ10GN User Manual
Playback (advanced)
108
Connecting to a PC (PTP)
Do not follow the setting below on the OS except for Windows XP and Mac OS X.
1
Turn the camera on and then set
[USB MODE] to [PTP]. (P105)
[USB MODE] to [PTP]. (P105)
2
Connect the camera to a PC via
the USB connection cable
(supplied).
the USB connection cable
(supplied).
[Windows]
The camera icon appears on the
[My Computer] folder.
• If it is the first time for you to
The camera icon appears on the
[My Computer] folder.
• If it is the first time for you to
connect the camera to a PC, the
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then the camera
icon appears on the [My Computer]
folder.
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then the camera
icon appears on the [My Computer]
folder.
[Macintosh]
You can read pictures with image
capture or iPhoto.
You can read pictures with image
capture or iPhoto.
¬Suggestions/Tips ¬
• Refer to P106 carefully when
connecting to the OS except for
Windows XP and Mac OS X with
setting [USB MODE] to [PTP].
Windows XP and Mac OS X with
setting [USB MODE] to [PTP].
• When connecting to a PC, we
recommend using the AC adaptor as
the power source.
the power source.
• If the remaining battery power
becomes low during communication,
the power indicator blinks and the
alarm beeps. In this case, stop the
communication. Then turn the camera
off and charge the battery.
the power indicator blinks and the
alarm beeps. In this case, stop the
communication. Then turn the camera
off and charge the battery.
• When connecting to a PC, pictures
and sounds are not output from the
[A/V OUT] socket.
[A/V OUT] socket.
• It may take time to display the
communication screen depending on
the PC.
the PC.
A/V
OUT
USB
ACCESS
FZ10-GN.book 108 ページ ２００３年１２月２４日 水曜日 午前１０時３９分