Panasonic AW-PH400 User Manual

Indoor Pan/Tilt Head AW-PH400

Specifications

Genlock input:

BNC
Black burst or composite video signal

Prompter input

(PROMPTER IN):

BNC
Through output to PROMPTER connector

Prompter output

(PROMPTER OUT):

D-SUB 15-pin

Camera video output

VIDEO:

BNC, 75-ohm output

Pr/C:

BNC, 75-ohm output

Pb:

BNC, 75-ohm output

SDI:

BNC

Camera, pan/tilt head control:

RJ45, RS-485, pan/tilt head control signal output

RP/IP

Connecting cable: 10BASE-T straight cable (equivalent to UTP category 5),
max. 500 meters

Functions/performance:

Maximum load-bearing capacity: 17.6 lbs (8 kg)
Tilt range: 300 degrees (approx. ±150 degrees)

The tilt range is limited to 190 degrees by the initial setting of the AW-RP400. To move
beyond 190 degrees, change the AW-RP400 setting.
The tilt range is subject to restrictions depending on the cable and lens of camera to be
mounted on pan/tilt head.

Pan range: 400 degrees (approx. ±200 degrees)
Maximum operating speed: 90 degrees/sec.

(Maximum operating speed with prompter mounted: 30 degrees/sec.)

Repeatability: ±30”
Noise level: Less than NC30 (at less than 30 degrees/sec.)

Ambient operating temperature: 32°F to 113°F (0°C to +45°C)

Storage temperature:

–4°F to 140°F (–20°C to +60°C)

Ambient operating humidity:

30% to 90% (no condensation)

Dimensions (W

D):

12-3/8”

21”

7-3/8” (315

534

188 mm)

Weight:

Approx. 22.5 lbs (10.2 kg)

Finish:

AV ivory paint (color resembling Munsell 7.9Y6.8/0.8)

Weight and Dimensions indicated above are approximate.
Specifications are subject to change without notice.

Supply voltage:

AC 120 V, 60 Hz

Power consumption: 145 W

indicates safety information.