Panasonic AW-RL400G User Manual

Indoor Pan/Tilt Head AW-PH400

18 (E)

ENGLISH

Specifications

Genlock input:

BNC
Black burst or composite video signal

Prompter input

(PROMPTER IN):

BNC
Through output to PROMPTER connector

Prompter output

(PROMPTER OUT):

D-SUB 15-pin

Camera video output

VIDEO:

BNC, 75-ohm output, 1 Vp-p
Connecting cable: 5C-2V, max. 1000 meters

Y, Pr/C, Pb:

Y/C

Y: 1 Vp-p/75 ohms
C: 0.285Vp-p/75 ohms (burst)

Component video:

Y: 1 Vp-p/75 ohms
Pr: 0.7Vp-p/75 ohms
Pb: 0.7Vp-p/75 ohms

Connecting cable: 5C-2V, max. 1000 meters

SDI:

BNC

Camera, pan/tilt head control:

RJ45, RS-485, pan/tilt head control signal output

RP/IP

Connecting cable: 10BASE-T straight cable (equivalent to UTP category 5),
max. 500 meters

Functions/performance:

Maximum load-bearing capacity: 8 kg
Tilt range: 190 degrees (approx. ±95 degrees)

The tilt range is subject to restrictions depending on the cable and lens of camera to be
mounted on pan/tilt head.

Pan range: 400 degrees (approx. ±200 degrees)
Maximum operating speed: 90 degrees/sec.

(Maximum operating speed with prompter mounted: 30 degrees/sec.)

Repeatability: ±30”
Noise level: Less than NC30 (at less than 30 degrees/sec.)

Ambient operating temperature: 0°C to +45°C
Storage temperature:

–20°C to +60°C

Ambient operating humidity:

30% to 90% (no condensation)

Dimensions (W

D):

???

??? mm

Weight:

Approx. ?? kg

Finish:

AV ivory paint (colour resembling Munsell 7.9Y6.8/0.8)

Supply voltage:

AC 240V, 50/60 Hz

Power consumption: 145W

indicates safety information.