Nikon S52c User Manual

Inserting the Battery into the Camera

First Ste

p

s

Turn the camera off and confirm that the power-on 
lamp is off before removing the battery. To eject the 
battery, open the battery-chamber/memory card slot 
cover and slide the battery latch in the direction shown 
1. The battery can then be removed by hand 2. 
• Note that the battery may become hot during use; 

observe due caution when removing the battery.

To turn on the camera, press the power switch. The 
power-on lamp (green) will light and the monitor will 
turn on. To turn off the camera, press the power switch 
while the power-on lamp (green) is on.
• If the camera is turned off, hold down 

c to turn the 

camera on in playback mode (

B

Be sure to read and follow the warnings for the battery on page iii and the section, “The Battery” 
(

A 115), before using the battery.

D

If no operations are performed for about five seconds in shooting mode, the monitor will dim to 
save power. Using any of the camera controls will reactivate the display. If no operations are 
performed for about a minute (default setting), the monitor will turn off automatically and the 
camera will enter standby mode. If no operations are performed for another three minutes, the 
camera will turn off automatically (

A 107).

Pressing the power switch, or the shutter-release button, while the monitor is off in standby mode 
will reactivate the monitor. 

1

2