Nikon S52c User Manual

Charging the Battery Using the AC Adapter (COOLPIX S52c)

First Ste

p

s

The battery begins charging. 

The power-on lamp (orange) will blink, and the battery 
will start charging. 
The power-on lamp (orange) stops blinking when 
charging is complete.
A fully exhausted battery will recharge in about two hours.
The following chart explains power-on lamp status while the AC adapter is connected to 
the COOLPIX S52c. 

Disconnect the camera and AC adapter when charging is complete.

Press the power switch to turn the camera off when the power-on lamp is lit green.
Disconnect the AC adapter from the camera’s multi connector.
Be sure to unplug the power cable from the power outlet. 

B

Only use the power cable for the AC Adapter EH-63 (supplied) for the COOLPIX S52c.

D

The AC Adapter EH-63 (supplied) can:

• When the camera is turned on, power the camera from a power outlet.

• If you are using the COOLPIX S52c, the battery inserted into the camera is charged when the 

camera is turned off with the AC adapter connected.

• If you are using the COOLPIX S52, the AC Adapter EH-63 is not supplied with the camera. 

Furthermore, the battery cannot be charged while it is inserted into the camera.

Do not, under any circumstances, use another make or model of AC adapter. Failure to observe this 
precaution could result in fire or product malfunction.

The AC adapter and the supplied audio/video cable or USB cable cannot be used at the same time.

D

If you are using the COOLPIX S52c, the Battery Charger MH-62 (

A 112), for Rechargeable Li-ion 

Battery EN-EL8, is available separately. 

Power-on lamp

Description

Blinks (orange)

Battery charging.

On (orange)

Battery fully charged.

On (green)

The camera is on.

Flickers

• Use the charger at an ambient temperature range of 5 

to 35 °C (41 to 95 °F) to charge the battery.

• If the lamp flickers rapidly, the AC adapter is not 

correctly inserted or the battery is faulty. Reinsert the 
AC adapter or replace the battery.