Casio EX-ZR200 User Manual

115

Viewing Snapshots and Movies

Use a commercially available HDMI cable to 
connect the camera to the TV. For information 
about playback, see the procedure starting 
from step 2 under “Viewing Snapshots and 
Movies on a TV Screen” on page 113.

• Use a commercially available HDMI cable that is marked with the logo shown to the 

right.

• Output to a TV is not supported while the camera is in the REC mode.

• Use a HDMI cable that with a plug that is compatible with the camera’s HDMI mini 

connector on one end, and a plug that is compatible with your TV’s HDMI 
connector on the other end.

• Proper image and/or audio output and other operations may not be possible with 

some devices.

• Connecting the camera to the HDMI connector of another device can damage both 

the camera and the other device. Never connect two HDMI output connectors to 
each other.

• Make sure that the camera is turned off before plugging in or unplugging the cable. 

Check the user documentation that comes with the TV for information about 
requirements before plugging into or unplugging from the TV.

• When cables are connected to both the USB/AV port and the HDMI output 

connector, the HDMI output connector connection is given priority.

• Disconnect the HDMI cable when you are not using HDMI output. The camera’s 

monitor screen may not operate normally while the HDMI cable is connected.

• Audio is stereo.
• Audio is initially output by the camera at maximum volume. When you first start 

displaying images, set the TV volume control at a relatively low level and then 
adjust it as required.

HDMI connector

HDMI cable (commercially available)

HDMI mini connector

HDMI input

HDMI output 
(Mini)

Terminal cover