Panasonic MW-20 User Manual

VQT2Z87

¼

When “View Demo” is selected in 
the basic operation (¼P20), the 
Demo is displayed.
And the demo function is 
automatically activated when the 
following conditions continues 
2 minutes or more without 
operation.

When the SD card is not 
inserted
When the iPod/iPhone is not 
connected
When there are no photos in the 
internal memory

To stop displaying the demo, 
press any of the buttons other 
than the power button on the main 
unit or the remote control.

•

•

•

Change the remote control mode 
when malfunction occurs on this 
unit while using the remote 
control of other devices.
Remote Control 1 / Remote 
Control 2
Example: When setting the 
remote control mode to 2
1. Select “Remote Control 2” in 

step 

4 in the basic operation 

(¼P20) and press [OK].
(“Simultaneously press 
[CLOCK] and [OK] on your 
remote control for at least 
2 seconds, and change the 
mode on your remote control.” 
is displayed.)

2. Press and hold [OK] on the 

remote control without aiming it 
at this unit, and press and hold 
[CLOCK] for more than 
2 seconds.

3. Press [OK].

¼

¼

P23

Select “On” or “Off” in step 

4 in 

the basic operation (¼P20) and 
press [OK].
On: 
Lights up logo
Off: 
Lights off logo

¼

This unit’s settings are restored 
to the factory defaults. The clock 
setting, wall-mount setting and 
photo fi les in the internal memory 
remain unchanged.
1. Select “Yes” in step 

4 in the 

basic operation (¼P20) and 
press [OK].

2. Select “Yes” again and press 

[OK].

¼

All the data in the SD card will be 
deleted.
1. Select “Yes” in step 

4 in the 

basic operation (¼P20) and 
press [OK].

2. Select “Yes” again and press 

[OK].

¼

You can initialize (format) the 
internal memory. All photo data 
in the internal memory will be 
deleted.
1. Select “Yes” in step 

4 in the 

basic operation (¼P20) and 
press [OK].

2. “Photos set as protected 

will also be deleted. Do you 
really want to perform this 
operation?” is displayed, and 
then select “Yes” again and 
press [OK].

Protected photos are also 
deleted.
For using the physical format, 
see page 6.

•

•

You can confi rm the system 
software information (version) of 
this unit.

¼

This is a function when updating 
the system software is necessary 
in the future to improve the 
performance.
Please make sure to complete 
user registration which is 
necessary to receive information 
related to the system software 
update.

¼

  The audio is automatically stopped (paused) if it is being 

played back.

1. Select “Remote Control 1” in step 

4 in the basic operation 

(¼P20) and press [OK].

2. Press and hold [OK] on the remote control without aiming 

it at this unit, and press and hold [SLIDESHOW] for more 
than 2 seconds.

3. Press [OK].

When the same day/month/year is set for “Holiday 
Settings” and “Saturday Setting”, “Holiday Settings” takes 
priority.
When the display mode is set to vertical arrangement 
(¼P8), or “Adjust Brightness” (¼P14) is set to “

1”, the 

Panasonic Logo does not light on even if “Panasonic Logo” 
is set to “On”.
For the latest version of information, see the following 
homepage.
http://panasonic.jp/support/global/cs/audio/

„

•

•

•