Panasonic MW-20 User Manual
24
VQT2Z87
5. Fix the fi tting for wall-mounting to the wall.
Wall
G
G
Make sure to attach 2 screws for the fi tting.
Note
The vertical arrangement of the main unit is not available
when using in the wall-mounted state.
when using in the wall-mounted state.
When using the unit on a desk after removing
from the wall
from the wall
1. Select “No” for “Wall-mount Setting” in the setup menu
(¼P23) and press [OK].
2. Turn the unit off and remove the unit from the wall.
Note
When the “Wall-mount Setting” is changed to “No”, the
setting automatically returns to the previous state in which
the wall-mount setting was not set.
– Timer audio playback settings
– Power Save Settings
– Panasonic Logo
setting automatically returns to the previous state in which
the wall-mount setting was not set.
– Timer audio playback settings
– Power Save Settings
– Panasonic Logo
•
•
Using in a wall-mounted state
Attaching to a wall
Make sure to turn the power off to the unit and unplug the
AC adaptor.
Remove the Universal Dock for iPod.
AC adaptor.
Remove the Universal Dock for iPod.
1. Attach the screws for wall-mounting according
to the illustration below.
105 mm (4
9
/
64
")
53 mm (2
3
/
32
")
2. Attach the screws for wall-mounting.
Wall
Wall
A
B
3 mm (1/8") to
4 mm (5/32")
4 mm (5/32")
A
Screw for wall-mounting
B
Fix with the screws stuck out 3 mm (1/8") to 4 mm (5/32")
from the wall.
Make sure to attach 2 screws for wall-mounting.
Use a level guide, etc. so the screws for wall-mounting
become horizontal when attaching.
Use a level guide, etc. so the screws for wall-mounting
become horizontal when attaching.
3. Connect the AC adaptor to the unit, and then
insert the fi tting for wall-mounting.
C
D
E
C
Fold the stand part and turn upside down.
D
AC adaptor
E
Fitting for wall-mounting
4. Hook the main unit on the screws for
wall-mounting with the fi tting for
wall-mounting inserted into the main unit.
wall-mounting inserted into the main unit.
Wall
F
F
Set the 2 screws fi rmly to this position.
•
•
•
•
•