Panasonic AJ-P2C004HG User Manual

115

Preparation: Mounting the Camera on a Tripod

P

re

par

at

io

n

Connect the audio device to the AUDIO IN jack with the 
XLR cable.

Set the AUDIO IN switch to [REAR] for the channel to 
which the XLR cable is connected.

Set the LINE/MIC/+48V selector switch on the rear 
panel to [LINE].

a. LINE/MIC/+48V selector switch
b. AUDIO IN switch
c. AUDIO IN jack

When mounting the camera on a tripod, use the tripod adapter supplied with the camera.

Mount the tripod adapter on the tripod.

a. Tripod adapter
b. Pan head

Select an appropriate hole in the adapter, taking into 
account the center of gravity of the camera and tripod 
adapter combined.
Also, make sure that the diameter of the selected hole 
matches the diameter of the pan head screw.

Mount the camera on the tripod adapter.
Slide the camera forward along the grooves until you 
hear a “click”.

c. Tripod adapter
d. Red lever
e. Black lever

While holding the red lever down, move the black lever in the 
direction of the arrow, and slide the camera backward to 
remove it.

If the tripod adapter pin does not return to its original position 
after the camera has been removed, hold the red lever down 
and move the black lever in the direction of the arrow again, 
in order to return the pin to its original position.
Please note that the camera cannot be mounted if the pin 
remains in the center.

When Using Audio Devices

Mounting the Camera on a Tripod

Removing the Camera from the Tripod Adapter

AJ-HPX2700G-VQT1V27_eng.book  115 ページ  ２００８年９月２日　火曜日　午後５時４３分