Panasonic AJ-P2C004HG User Manual
117
Preparation: Connection of the remote control unit (AJ-RC10G)
P
re
par
at
io
n
It is possible to control some of the functions remotely by
connecting the remote control unit AJ-RC10G (optional).
When AJ-RC10G is connected to the REMOTE connector
on the unit and the power switches of both of the unit and
AJ-RC10G are turned on, the unit automatically enters the
remote control mode.
The remote control mode is released when AJ-RC10G is
removed or the power for the AJ-RC10G is turned off.
connecting the remote control unit AJ-RC10G (optional).
When AJ-RC10G is connected to the REMOTE connector
on the unit and the power switches of both of the unit and
AJ-RC10G are turned on, the unit automatically enters the
remote control mode.
The remote control mode is released when AJ-RC10G is
removed or the power for the AJ-RC10G is turned off.
In the remote control mode, the following switches and
buttons on the unit are disabled.
buttons on the unit are disabled.
SHUTTER switch
MENU button
Jog dial button
GAIN switch
OUTPUT/AUTO KNEE switch
WHITE BAL switch
USER MAIN button
USER 1 button
USER 2 button
MENU button
Jog dial button
GAIN switch
OUTPUT/AUTO KNEE switch
WHITE BAL switch
USER MAIN button
USER 1 button
USER 2 button
When the remote control is connected, recording and
playback can be controlled through both the unit and the AJ-
RC10G.
playback can be controlled through both the unit and the AJ-
RC10G.
Notes
The state that was adjusted by connecting AJ-RC10G is
stored in the unit. Not to store the adjusted state in the
unit, open the FUNCTION MENU of AJ-RC10G to set the
RC DATA SAVE item to “OFF”.
When the dedicated cable is connected or removed,
ensure that the POWER switches on both the main unit
and AJ-RC10G are turned off.
Use Ver 1.11-00-000 or a later version of AJ-RC10G.
See the P2 support page on the following website for
information about upgrades to AJ-RC10G.
https://eww.pavc.panasonic.co.jp/pro-av/
stored in the unit. Not to store the adjusted state in the
unit, open the FUNCTION MENU of AJ-RC10G to set the
RC DATA SAVE item to “OFF”.
When the dedicated cable is connected or removed,
ensure that the POWER switches on both the main unit
and AJ-RC10G are turned off.
Use Ver 1.11-00-000 or a later version of AJ-RC10G.
See the P2 support page on the following website for
information about upgrades to AJ-RC10G.
https://eww.pavc.panasonic.co.jp/pro-av/
a. REMOTE connector
b. Dedicated cable
b. Dedicated cable
When this unit and AJ-RC10G are connected, the following
functions differ from those described in the operating
instructions that accompany AJ-RC10G.
functions differ from those described in the operating
instructions that accompany AJ-RC10G.
A. KNEE ON button
When “DRS” has been selected in the AUTO KNEE SW
menu option of this unit, this button can be used to
switch DRS on/off. This button is lit when DRS is on and
not lit when DRS is off.
The menu option AUTO KNEE SW can be found in the
<SW MODE> screen on the CAM OPERATION page.
menu option of this unit, this button can be used to
switch DRS on/off. This button is lit when DRS is on and
not lit when DRS is off.
The menu option AUTO KNEE SW can be found in the
<SW MODE> screen on the CAM OPERATION page.
Connection of the remote control unit
(AJ-RC10G)
Switch functions in the remote control mode
Recording and playback Operations in the
remote control mode
remote control mode
Notes for the remote control unit
AJ-RC10G
a
b
AJ-HPX2700G-VQT1V27_eng.book 117 ページ ２００８年９月２日 火曜日 午後５時４３分