Panasonic AJ-P2C004HG User Manual
56
Adjustments and Settings for Recording: Assigning Functions to User Buttons
The USER MAIN, USER 1, USER 2, MARKER SELECT and
TEXT MEMO buttons can be assigned user-selected
functions.
To select desired functions, use the menu options which can
be found in the <USER SW> screen on the CAM
OPERATION page.
TEXT MEMO buttons can be assigned user-selected
functions.
To select desired functions, use the menu options which can
be found in the <USER SW> screen on the CAM
OPERATION page.
For more details about functions which can be allocated to
the buttons, refer to [USER SW] (page 186).
the buttons, refer to [USER SW] (page 186).
INH:
No function assigned.
I.OVR:
Iris Override function assigned.
The target (reference) value in Auto Iris mode
must be changed.
To change the target value, put the unit into
this mode and press the jog dial button. Turn
the jog dial button clockwise or anti-clockwise
to change the value. The iris indication section
of the viewfinder screen displays “+”, “+ +”,
“–”, or “– –”.
When the desired value is displayed, stop
turning the jog dial button. Then, press the
dial button to accept that value.
+:
The target (reference) value in Auto Iris mode
must be changed.
To change the target value, put the unit into
this mode and press the jog dial button. Turn
the jog dial button clockwise or anti-clockwise
to change the value. The iris indication section
of the viewfinder screen displays “+”, “+ +”,
“–”, or “– –”.
When the desired value is displayed, stop
turning the jog dial button. Then, press the
dial button to accept that value.
+:
Iris opens up by 0.5.
+ +:
Iris opens up by 1.
–:
Iris closes down by 0.5.
– –:
Iris closes down by 1.
No indication:
The reference value is used.
S.BLK:
Super Black function assigned.
This function lowers the black level to the
pedestal level or below.
This function lowers the black level to the
pedestal level or below.
B.GAMMA: The black gamma function is allocated. This
function highlights the black gradations.
BLACK GAMMA is set to “+6”, and B.GAMMA
RANGE is set to “3”, regardless of the values
set in the BLACK GAMMA item on the menu
(<LOW SETTING> screen, <MID SETTING>
screen and <HIGH SETTING> screen on the
PAINT page).
BLACK GAMMA is set to “+6”, and B.GAMMA
RANGE is set to “3”, regardless of the values
set in the BLACK GAMMA item on the menu
(<LOW SETTING> screen, <MID SETTING>
screen and <HIGH SETTING> screen on the
PAINT page).
Y GET:
Function of indicating the brightness level of
the center marker assigned.
the center marker assigned.
DRS:
The function of the dynamic range stretcher is
allocated.
The function is allocated to compress the
video level with high brightness and stretched
the dynamic range.
allocated.
The function is allocated to compress the
video level with high brightness and stretched
the dynamic range.
Notes
Since the DRS function compresses the video levels
of sections with high brightness, there are slight
of sections with high brightness, there are slight
differences in color development when the DRS
function is turned on/off.
When the DRS function is turned on, Gamma mode,
the Knee function and the BLACK GAMMA function
are not available.
function is turned on/off.
When the DRS function is turned on, Gamma mode,
the Knee function and the BLACK GAMMA function
are not available.
ASSIST:
The function to turn on or off of the focus
assist indication is assigned.
assist indication is assigned.
Note
When the ASSIST function is turned on, a graph is
displayed on the bottom right of the viewfinder and the
LCD monitor. Adjust the focus ring on the lens so that
the graph comes further right.
displayed on the bottom right of the viewfinder and the
LCD monitor. Adjust the focus ring on the lens so that
the graph comes further right.
C.TEMP:
The function to switch to the mode that allows
the jog dial button to change the assigned
color temperature. It is useful for intentionally
changing the color temperature after adjusting
the white balance.
To change the color temperature, press the
user button with this assigned function, and
then press the jog dial button.
The color temperature indicated on the
viewfinder display is highlighted and starts
blinking, indicating that the color temperature
can be changed. While the indication is
blinking, the jog dial button can be turned to
change the color temperature. At this time, the
value set for the position ([PRST], [A], or [B])
to which the WHITE BAL switch is set is also
changed.
the jog dial button to change the assigned
color temperature. It is useful for intentionally
changing the color temperature after adjusting
the white balance.
To change the color temperature, press the
user button with this assigned function, and
then press the jog dial button.
The color temperature indicated on the
viewfinder display is highlighted and starts
blinking, indicating that the color temperature
can be changed. While the indication is
blinking, the jog dial button can be turned to
change the color temperature. At this time, the
value set for the position ([PRST], [A], or [B])
to which the WHITE BAL switch is set is also
changed.
VFR:
The function of switching the VFR function on/
off is assigned. For more details about the
VFR function, refer to [Variable Frame Rate
(VFR) Recording Function] (page 37).
off is assigned. For more details about the
VFR function, refer to [Variable Frame Rate
(VFR) Recording Function] (page 37).
FRATE:
When “ON” has been selected in the VFR
menu option, a function of switching to the
frame rate set in USR SW F.RATE is
assigned.
For example, if you have set FRAME RATE to
“24P” and USR SW F.RATE to “12P” for the
VFR function, you can use this button to
switch between 12P and 24P when the VFR
function is enabled. FRAME RATE and USR
SW F.RATE can be set from the <SYSTEM
MODE> screen of the SYSTEM SETTING
page.
menu option, a function of switching to the
frame rate set in USR SW F.RATE is
assigned.
For example, if you have set FRAME RATE to
“24P” and USR SW F.RATE to “12P” for the
VFR function, you can use this button to
switch between 12P and 24P when the VFR
function is enabled. FRAME RATE and USR
SW F.RATE can be set from the <SYSTEM
MODE> screen of the SYSTEM SETTING
page.
VF GAM:
When “FILM-REC” has been selected in the
GAMMA MODE SEL menu option, telecine
conversion correction is performed on the
viewfinder video. GAMMA MODE SEL can be
set from the <GAMMA> screen of the PAINT
page.
GAMMA MODE SEL menu option, telecine
conversion correction is performed on the
viewfinder video. GAMMA MODE SEL can be
set from the <GAMMA> screen of the PAINT
page.
Assigning Functions to User Buttons
Selectable Functions
AJ-HPX2700G-VQT1V27_eng.book 56 ページ ２００８年９月２日 火曜日 午後５時４３分