Panasonic AJ-P2C004HG User Manual
57
Adjustments and Settings for Recording: Assigning Functions to User Buttons
Ad
justment
s
and S
ett
ings
fo
fo
r Recor
ding
AUDIO CH1: Function of switching the input signal source
for audio channel 1 assigned.
Pressing the button switches the input signal
in the following order: FRONT W.L.
REAR. Note that the AUDIO IN switch can
also be used to change the input signal: later
specification takes precedence.
Pressing the button switches the input signal
in the following order: FRONT W.L.
REAR. Note that the AUDIO IN switch can
also be used to change the input signal: later
specification takes precedence.
AUDIO CH2: Function of switching the input signal source
for audio channel 2 assigned.
Pressing the button switches the input signal
in the following order: FRONT W.L.
REAR. Note that the AUDIO IN switch can
also be used to change the input signal: later
specification takes precedence.
Pressing the button switches the input signal
in the following order: FRONT W.L.
REAR. Note that the AUDIO IN switch can
also be used to change the input signal: later
specification takes precedence.
REC SW:
Function of the REC START/STOP button
assigned.
assigned.
RET SW:
Function of the RET button at the lens
assigned.
assigned.
PRE REC:
PRE RECORDING switch on/switch off
function assigned.
function assigned.
SLOT SEL: Function of switching the target P2 card
among multiple cards assigned. Not available
when recording with the VFR function is “ON”.
when recording with the VFR function is “ON”.
PC MODE:
The function to turn on or off the assigned
USB device or USB host mode.
Switching between the USB device and USB
host modes is set by selecting the PC MODE
SELECT menu option in the <SYSTEM
MODE> screen on the SYSTEM SETTING
page.
USB device or USB host mode.
Switching between the USB device and USB
host modes is set by selecting the PC MODE
SELECT menu option in the <SYSTEM
MODE> screen on the SYSTEM SETTING
page.
TEXT MEMO:Function of switching the text memo function
on/off is assigned. For more details about the
text memo function, refer to [Text Memo
Function] (page 44). This switching function
can only be assigned to the TEXT MEMO
button.
text memo function, refer to [Text Memo
Function] (page 44). This switching function
can only be assigned to the TEXT MEMO
button.
VF MARK:
Function to select A, B or OFF as the marker
for recording in the viewfinder. The A or B
marker type is set using the <VF MARKER>
screen of the VF page. This switching function
can only be assigned to the MARKER
SELECT button.
for recording in the viewfinder. The A or B
marker type is set using the <VF MARKER>
screen of the VF page. This switching function
can only be assigned to the MARKER
SELECT button.
Notes
When the remote controller, AJ-RC10G (optional), is
connected and I.OVR or C.TEMP is assigned to the user
button on the side of the AJ-RC10G, operation of the jog
dial button on the main unit is disabled.
The following functions are turned off when the power of
the main unit is switched off.
I.OVR/S.BLK/B GAMMA/Y GET/DRS/ASSIST/C.TEMP/
VF GAM
With regard to C.TEMP, note that the changes in color
temperature will be stored.
connected and I.OVR or C.TEMP is assigned to the user
button on the side of the AJ-RC10G, operation of the jog
dial button on the main unit is disabled.
The following functions are turned off when the power of
the main unit is switched off.
I.OVR/S.BLK/B GAMMA/Y GET/DRS/ASSIST/C.TEMP/
VF GAM
With regard to C.TEMP, note that the changes in color
temperature will be stored.
AJ-HPX2700G-VQT1V27_eng.book 57 ページ ２００８年９月２日 火曜日 午後５時４３分