Panasonic AJ-P2C004HG User Manual

Page of 206
59
Adjustments and Settings for Recording: Selecting Audio Input Signals and Adjusting Recording Levels
Ad
justment
and S
ett
ings
 fo
r Recor
ding
To adjust the recording levels for audio channels 1 and 2, 
follow the steps below.
1
Position the MONITOR SELECT CH1/2 / CH3/4-
selector switch at [CH1/2] so that the audio level meter 
on the display window will provide CH1 and CH2 
indications. Ensure that the channel indications 
displayed in the window are “1” and “2”.
Whether to enable or disable the FRONT AUDIO 
LEVEL control must be preset through menu options 
FRONT VR CH1 and FRONT VR CH2. Note that this 
control is factory-disabled.
The menu options are found in the <MIC/AUDIO1> 
screen on the MAIN OPERATION page.
2
Position the AUDIO SELECT CH1/CH2 switch at [MAN].
3
While checking the audio channel level meter in the 
display window or the audio level meter in the 
viewfinder, adjust the AUDIO LEVEL CH1/CH2 control.
Note that if the level exceeds the top bar (0 dB), the 
word “OVER” illuminates to show that the input level is 
excessive. The adjustment made in such a way that the 
maximum level will not reach the 0 dB bar.
Audio level meter on the display window
Audio level meter in the viewfinder
When operating the unit without a sound recordist, it is 
recommended that the FRONT AUDIO LEVEL control 
should be used to adjust the audio level.
Preset the channel to be adjusted, and use the FRONT 
AUDIO LEVEL control to adjust the audio level while 
checking the audio level meter in the viewfinder to ensure 
that the level does not become excessive.
This function enables the recording level to be adjusted 
using the FRONT AUDIO LEVEL control.
To select this function, perform menu operations to open the 
<MIC/AUDIO1> screen from the MAIN OPERATION page, 
and set whether to enable or disable the FRONT AUDIO 
LEVEL controls for the system selected as the input signals 
using the FRONT VR CH1 and FRONT VR CH2 items.
The following table shows the effects on the recording level 
for audio channels 3 and 4 that depend on the settings and 
input levels specified through the menu options AUTO 
LEVEL CH3 and AUTO LEVEL CH4. Note that the recording 
level cannot be adjusted manually.
These options are found in the <MIC/AUDIO1> screen on 
the MAIN OPERATION page.
Adjusting Recording Levels
h
E
F
Y
minM
s
frm
1
2
0
D
SLAVE HOLD
GPS
BATT
E
F
OVER
10
OO
40
-dB
30
20
LOOP
MEDIA
HD
OP-SLOT
VTCG TIME DATE P-iREC
CTL
NDF
F : 1 - - - -
R : 2 - - - -   - - - +
Selecting Function for the FRONT AUDIO LEVEL Control
 











CH3 and CH4 Recording Levels
AUTO LEVEL 
CH3/CH4
Input level
LINE
MIC
ON
AGC ON
AGC ON
OFF
AGC/LIMITER OFF
LIMITER ON
AJ-HPX2700G-VQT1V27_eng.book  59 ページ  2008年9月2日 火曜日 午後5時43分