Sony BRU-H700 User Manual

Page of 56
GB 
2
Owner’s Record
The model and serial numbers are located on the top. 
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your 
Sony dealer regarding this product.
Model No. BRU-H700
Serial No.                                        
To reduce a risk of fire or electric shock, 
do not expose this product to rain or 
moisture.
To avoid electrical shock, do not open the 
cabinet.  Refer servicing to qualified 
personnel only. 
WARNING
THIS APPARATUS MUST BE EARTHED.
WARNING
The mains plug on this equipment must be used to 
disconnect mains power.
Please ensure that the socket outlet is installed near the 
equipment and shall be easily accessible.
In the event of abnormal operations, disconnect the 
mains plug.
Laser Notice :
This product contains an optical fiber connecter using 
laser that complies with EN 60825-1.
This product is classified as a CLASS 1 LASER 
PRODUCT.
Laser Diode information ( Optical Fiber Connector )
         Wavelength      850 nm
CAUTION
The use of controls or adjustments or performance of 
procedures other than those specified herein may result 
in hazardous radiation exposure.
CAUTION
Do not look at the end of optical connector with naked 
eyes or through optical equipment while the power is 
supplied to this product. Otherwise, your eyes may be 
injured.
ATTENTION
The electromagnetic fields at the specific frequencies 
may influence the picture of this unit. 
For customers in the U.S.A.
This equipment has been tested and found to comply 
with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful 
interference when the equipment is operated in a 
commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction 
manual, may cause harmful interference to radio 
communications. Operation of this equipment in a 
residential area is likely to cause harmful interference in 
which case the user will be required to correct the 
interference at his own expense.
You are cautioned that any changes or modifications not 
expressly approved in this manual could void your 
authority to operate this equipment.
The shielded interface cable recommended in this 
manual must be used with this equipment in order to 
comply with the limits for a digital device pursuant to 
Subpart B of Part 15 of FCC Rules.
For the customers in Canada
This Class A digital apparatus complies with Canadian 
ICES-003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe A est conforme à la 
norme NMB-003 du Canada.
For the customers in Europe
Warning
This is a Class A product. In a domestic environment, 
this product may cause radio interference in which case 
the user may be required to take adequate measures.
In the case that interference should occur, consult your 
nearest authorized Sony service facility.
INTERFACE CABLE
This device requires shielded interface cables to comply 
with FCC emission limits.
WARNING
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, 
and (2) this device must accept any interference 
received, including interference that may cause 
undesired operation.