Sony BRU-H700 User Manual
Features
GB
4
Features
The BRU-H700 HD Optical Multiplex Unit is designed
to connect the BRC-H700 HD 3CCD Color Video
Camera.
to connect the BRC-H700 HD 3CCD Color Video
Camera.
Long-distance transmission via optical fiber
cable (BRC-H700 only)
The BRU-H700 is equipped with a camera connector to
allow the connection of multiplex optical fiber cable.
You can connect the BRC-H700 HD camera from up to
1,000 m (3,281 feet) away by inserting the BRBK-H700
HD Optical Multiplex Card into the HD camera and
using the CCFC-M100HG Optical Fiber Cable.
cable (BRC-H700 only)
The BRU-H700 is equipped with a camera connector to
allow the connection of multiplex optical fiber cable.
You can connect the BRC-H700 HD camera from up to
1,000 m (3,281 feet) away by inserting the BRBK-H700
HD Optical Multiplex Card into the HD camera and
using the CCFC-M100HG Optical Fiber Cable.
Two interface card slots equipped
The BRU-H700 is equipped as standard with an RGB/
component video output (D-sub 15-pin). In addition to
this connector, two interface card slots allow the unit to
be equipped with various analog signal outputs such as
composite video, S video, component video and RGB
outputs, and digital signal outputs such as SD-SDI
signal, HD-SDI signal, VESA standard signal (VGA,
XGA and WXGA) and HDV standard signal outputs.
The BRU-H700 is equipped as standard with an RGB/
component video output (D-sub 15-pin). In addition to
this connector, two interface card slots allow the unit to
be equipped with various analog signal outputs such as
composite video, S video, component video and RGB
outputs, and digital signal outputs such as SD-SDI
signal, HD-SDI signal, VESA standard signal (VGA,
XGA and WXGA) and HDV standard signal outputs.
External sync signal input/output equipped
When multiple BRC-H700 HD cameras are connected
via the Optical Fiber Cable, the video signal can be
synchronized by inputting the sync signal into the
external sync input connector.
When multiple BRC-H700 HD cameras are connected
via the Optical Fiber Cable, the video signal can be
synchronized by inputting the sync signal into the
external sync input connector.
Audio line output connectors (phono jacks, R/
L) equipped
The BRU-H700 allows output of stereo audio line
signals that are transmitted from the BRBK-H700 HD
Optical Multiplex Card inserted into the BRC-H700 HD
camera.
L) equipped
The BRU-H700 allows output of stereo audio line
signals that are transmitted from the BRBK-H700 HD
Optical Multiplex Card inserted into the BRC-H700 HD
camera.
Connecting Cables
Use the following connecting cable to connect devices
in this system.
in this system.
RS-232C cable
Example of System Configuration
Note
To start the system, first turn on the power of the BRC-
H700 camera, then turn on the power of the BRU-H700
(this unit). Otherwise, the error message
“Communication error Please check connection” may
appear.
H700 camera, then turn on the power of the BRU-H700
(this unit). Otherwise, the error message
“Communication error Please check connection” may
appear.
Cable Part
No.
Number
RS-232C cable
(3m (10feet))
(3m (10feet))
1-590-879-3X
1
IN EXT SYNC OUT
IN VISCA RS-232C OUT
CAMERA
~
AC IN
VISCA RS-422
AUDIO
L
R
FUNCTION
1
6
RGB/COMPONENT
to AC outlet
BRBK-H700 HD Optical
Multiplex Card
Multiplex Card
AC power cord
(supplied)
(supplied)
CCFC-M100HG Optical
Fiber Cable
VISCA RS-232C IN
to AC
outlet
outlet
CAMERA
BRU-H700 HD
Optical Multiplex
Unit (this unit)
Optical Multiplex
Unit (this unit)
RGB/
COMPONENT
connecting
cable with D-sub
15-pin
connectors
cable with D-sub
15-pin
connectors
HD monitor, etc.
RS-232C cable
(supplied with the
RM-BR300)*
(supplied with the
RM-BR300)*
VISCA RS-232C
RM-BR300 Remote Control Unit
to AC outlet
* The VISCA RS-422 connection is also available if you use the
VISCA RS-422 connectors.
Optical connector
to RGB/
component
input
component
input
HD camera
BRC-H700
BRC-H700