Panasonic NV-GS300B User Manual

Record mode

LSQT0974

The last image recorded is played back for 2 to 
3 seconds. After checking, the Camcorder will be 
set to a recording pause.
≥Set to Tape Recording Mode.

1 appears.

≥The [RECORDING CHECK STARTED] 

indication appears on the screen of the 
Camcorder.

Searches for the last part of the image recorded 
(unused part of the tape). After the search is 
finished, the blank search function is canceled 
and the Camcorder is put into recording pause.
≥Set to Tape Recording Mode.

1 appears.

ª

Move the joystick down to select the [

∫] icon.

≥If the cassette tape has no blank part, then the 

Camcorder will stop at the end of the tape.

≥The Camcorder stops at a point approx. 

1 second before the end of the last image 
recorded. When you start recording at that 
point, the image can be recorded seamlessly 
from the last image.

You can record still pictures while recording 
image onto a tape.
≥Set to Tape Recording Mode.

≥For the number of still pictures to be recorded 

on a card, refer to

≥When recording pictures onto a card, the 

recording start/stop button is disabled.

≥You can select the picture quality for still 

pictures to be recorded. (

) 

≥The sizes of pictures to be recorded are [

] 

(16:9) or [

] (4:3). (This is not mega pixel 

still picture recording.)

≥In order to record higher quality still pictures, 

you must use the card recording mode.

≥When recording still pictures, hold the 

Camcorder firmly with your hands and keep 
your arms stationary at your side so as not to 
shake the Camcorder.

1

1

PHOTO SHOT

LSQT0974_ENG.book  30 ページ  ２００５年１１月７日　月曜日　午前１１時５８分