Panasonic NV-GS300B User Manual
Record mode
31
LSQT0974
Recording still pictures onto a card
(Photoshot)
(Photoshot)
≥Set to Card Recording Mode.
≥The lens cover opens automatically.
1
Press the [PHOTO SHOT] button halfway in
order to adjust focusing. (For auto focusing
only)
≥If you set [O.I.S.] to [ON], then the image
order to adjust focusing. (For auto focusing
only)
≥If you set [O.I.S.] to [ON], then the image
stabilizer function will be more effective.
([
([
(MEGA Optical image stabilizer)] will
be indicated.)
≥The iris/gain value is fixed and this
Camcorder focuses on the subject
automatically.
automatically.
1
Shutter chance mark
± (The white lamp flashes.):
Focusing
¥ (The green lamp lights up.):
When in focus
No mark:
When focusing is unsuccessful
≥The shutter chance mark is indicated as follows
when the [PHOTO SHOT] button is not pressed
halfway. Please use it as a guide for recording.
halfway. Please use it as a guide for recording.
¥ (The green lamp lights up.):
When in focus and a good picture
can be recorded
can be recorded
± (The white lamp lights up.):
Almost in focus
2
Focus area
2
Press the [PHOTO SHOT] button fully.
ª
To record still pictures clearly
≥When zooming in on the subject with a
magnification of
4k or higher, it is difficult to
reduce the slight shaking from holding the
Camcorder by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
Camcorder by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
≥When recording still pictures, hold the
Camcorder firmly with your hands and keep
your arms stationary at your side so as not to
shake the Camcorder.
your arms stationary at your side so as not to
shake the Camcorder.
≥You can record stable pictures without shaking
by using a tripod and the remote control.
≥For the number of still pictures to be recorded
on a card, refer to
≥The moving picture and sound cannot be
recorded.
≥While data are recorded on a card, do not
operate the mode dial.
≥When the access lamp is lit, do not insert or
remove a card.
≥Another product may degrade or not play back
data recorded on this Camcorder.
≥If set [PICT.QUALITY] >> [
], mosaic-pattern
noise may appear on a playback image
depending on the picture content.
depending on the picture content.
≥When the [PICTURE SIZE] is set to other than
[
] or [
], the mega pixel recording mode
is set.
ª
On-screen display in the card
recording mode
recording mode
1) Still picture size
2) Card indication (
2) Card indication (
)
3) Number of recordable still pictures
(When no pictures can be recorded, the red
light will flash.)
light will flash.)
4) Quality of still pictures
PC
MEGA
PHOTO SHOT
1
2
2
0.2
0.3
M
100
100
1)
3)
4)
2.4
2)
LSQT0974_ENG.book 31 ページ ２００５年１１月７日 月曜日 午前１１時５８分