Panasonic AJ-HPX3100G User Manual

109

Preparation: Power Supply

reparati

Mount the Anton/Bauer battery pack.

Insert the battery and slide it in the direction of the
arrow.

<For your information>
Removing the battery pack
Completely push down and hold the release lever on
the battery holder. Then, slide the battery pack in the
opposite direction to the arrow while holding the lever
down.

Setting the battery type.

Select the battery type listed under BATTERY SELECT.
The menu item BATTERY SELECT is found in the
<BATTERY/P2CARD> screen on the MAIN
OPERATION page.

The following Anton/Bauer batteries can be used:

•

HYTRON140

•

DIONIC90

•

DIONIC160

Mount the V-mount adapter plate.

Setting the battery type.

Select the battery type listed under BATTERY SELECT.
When using another battery which cannot be selected
using the BATTERY SELECT item setting, select TYPE
A, TYPE B or TYPE C, and set the items that
correspond to the characteristics of the battery. These
menu items are found in the <BATTERY SETTING>
screen on the MAIN OPERATION page.

Note

For information about the V-mount adapter plate, please
contact the store where you purchased the camera-
recorder.

Mounting the Battery and Setting the Battery Type

Using an Anton/Bauer Battery Pack

Anton/Bauer
Battery Pack

Release lever

When using a V-mount type battery pack

AJ-HPX3100G(VQT3A79)_E.book 109 ページ２０１０年９月１７日　金曜日　午後９時２１分