Panasonic AJ-HPX3100G User Manual
12
General: Features of the Input/Output unit
_
Independent Dual HD SDI output equipped as
standard
standard
The HD SDI signals output from the SDI OUT connector
and the MON OUT connector are each independent.
Embedded audio is superimposed on HD SDI output.
Also, in SD mode, independent dual SD SDI signals can
be output from the SDI OUT connector and the MON
OUT connector.
and the MON OUT connector are each independent.
Embedded audio is superimposed on HD SDI output.
Also, in SD mode, independent dual SD SDI signals can
be output from the SDI OUT connector and the MON
OUT connector.
_
Features USB2.0 port (HOST/DEVICE)
By connecting with a PC via USB2.0, a P2 card inserted
in AJ-HPX3100 can be used as a bulk storage device.
It is also possible to store data on a P2 card onto a USB
2.0-connected external hard disk equipped with USB
host capability as well as view clips stored on hard disks
and write them to P2 cards. (Refer to page 136)
in AJ-HPX3100 can be used as a bulk storage device.
It is also possible to store data on a P2 card onto a USB
2.0-connected external hard disk equipped with USB
host capability as well as view clips stored on hard disks
and write them to P2 cards. (Refer to page 136)
_
Down converter output provided as a standard
configuration
configuration
When in HD mode, the MON OUT connector can output
down converter signals (SD SDI signals or analog
composite signals).
down converter signals (SD SDI signals or analog
composite signals).
_
Remote control connector
By connecting the remote control unit (AJ-RC10G) or
the extension control unit (AG-EC4G), which is available
as an optional accessory, the unit can be controlled
remotely. (Refer to page 143)
the extension control unit (AG-EC4G), which is available
as an optional accessory, the unit can be controlled
remotely. (Refer to page 143)
_
Confirmation of return video signals
With the viewfinder, you can check the return video
signal (analog HD-Y signal) supplied to the GENLOCK
IN connector of this unit or the HD SDI signal input to
the SDI IN connector. And you can use them to check
programs.
Only video signals from the same record format can be
confirmed. Also, in SD mode, you can check only the
SD SDI signal input to the SDI IN connector.
signal (analog HD-Y signal) supplied to the GENLOCK
IN connector of this unit or the HD SDI signal input to
the SDI IN connector. And you can use them to check
programs.
Only video signals from the same record format can be
confirmed. Also, in SD mode, you can check only the
SD SDI signal input to the SDI IN connector.
_
DC OUT connector
The DC OUT connector of the unit produces 1.5 A of
electrical current.
By connecting an external switch to this connector, it is
possible to control REC start/stop.
Since a tally lamp can be used by connecting the LED
to this connector, it is useful for shooting video when
fixing the camera on a crane. (Refer to page 117)
electrical current.
By connecting an external switch to this connector, it is
possible to control REC start/stop.
Since a tally lamp can be used by connecting the LED
to this connector, it is useful for shooting video when
fixing the camera on a crane. (Refer to page 117)
_
HD/SD SDI input function
You can record SDI signals input from the SDI IN
connector.
However, what you can record is limited to the SDI
signal with the same recording format as this unit.
connector.
However, what you can record is limited to the SDI
signal with the same recording format as this unit.
_
LIGHT connector
You can connect to Anton/Bauer Ultralight 2. You can
use bulbs up to 50 W.
For batteries, because sometimes there isn’t enough
power for lighting, use batteries with an ample power
margin.
use bulbs up to 50 W.
For batteries, because sometimes there isn’t enough
power for lighting, use batteries with an ample power
margin.
_
Viewfinder connection
From the viewfinder connector of the unit, 1080-59.94i
or 1080-50i signals are output.
Furthermore, signals are output for switching the
frequencies of the connected viewfinder.
Confirm images in multi formats by connecting the
viewfinder (AJ-HVF21KG, AJ-CVF100G), which is
available as an optional accessory. (Refer to page 30)
or 1080-50i signals are output.
Furthermore, signals are output for switching the
frequencies of the connected viewfinder.
Confirm images in multi formats by connecting the
viewfinder (AJ-HVF21KG, AJ-CVF100G), which is
available as an optional accessory. (Refer to page 30)
_
User button
On the side panel of the unit, five user buttons (USER
MAIN/USER1/USER2/SHOT MARK/TEXT MEMO) are
available.
Each button can be assigned the on/off function for any
frequently used feature selected from among the many
features of the unit, such as slot select and Y get (Refer
to page 55).
MAIN/USER1/USER2/SHOT MARK/TEXT MEMO) are
available.
Each button can be assigned the on/off function for any
frequently used feature selected from among the many
features of the unit, such as slot select and Y get (Refer
to page 55).
_
Camera extension system
By combining the camera adapter (AG-CA300G) and
the base station (AG-BS300P/E) which are optional, you
can employ this unit as a camera extension system. In
addition to consulting the instruction manual for each
device regarding connection methods and precautions
for these devices, use them according to the AJ-
HPX3000G guidelines.
This unit is compatible with the HD viewfinder, so it is
not possible to check the return video image in the
viewfinder on systems where the SYSTEM MODE menu
option is set to “480-59.94i” or “576-50i”, with the VF
Interface box (AG-YA500G) connected. You can select
the SYSTEM MODE menu option from the <SYSTEM
MODE> screen of the SYSTEM SETTING page.
the base station (AG-BS300P/E) which are optional, you
can employ this unit as a camera extension system. In
addition to consulting the instruction manual for each
device regarding connection methods and precautions
for these devices, use them according to the AJ-
HPX3000G guidelines.
This unit is compatible with the HD viewfinder, so it is
not possible to check the return video image in the
viewfinder on systems where the SYSTEM MODE menu
option is set to “480-59.94i” or “576-50i”, with the VF
Interface box (AG-YA500G) connected. You can select
the SYSTEM MODE menu option from the <SYSTEM
MODE> screen of the SYSTEM SETTING page.
Features of the Input/Output unit
Other features
AJ-HPX3100G(VQT3A79)_E.book 12 ページ ２０１０年９月１７日 金曜日 午後９時２１分