Panasonic AJ-HPX3100G User Manual
14
General: Color TV Standard Settings (Settings for frame frequency)
The unit is delivered with the color TV standard not yet specified. To revise the settings for frame frequency according to the
preferred standard, refer to the procedures described below.
preferred standard, refer to the procedures described below.
1
After connecting the unit to the power supply
and then turning on the power, press the
MENU SW button while pressing the LIGHT
SW button to open OPTION MENU.
and then turning on the power, press the
MENU SW button while pressing the LIGHT
SW button to open OPTION MENU.
2
Turn the JOG dial button to move the cursor
(arrow) to the AREA SELECT item, and the
press the JOG dial button. The menu item
AREA SELECT is found in the <AREA
SETTING> screen on the OPTION MENU page.
(arrow) to the AREA SELECT item, and the
press the JOG dial button. The menu item
AREA SELECT is found in the <AREA
SETTING> screen on the OPTION MENU page.
3
Select the area among NTSC, NTSC(J), and
PAL. After selecting the area by turning the
JOG dial button, press the JOG dial button.
PAL. After selecting the area by turning the
JOG dial button, press the JOG dial button.
4
Move the cursor (arrow) to _
AREA SET by
turning the JOG dial button, and then press
the JOG dial button. The following window
appears.
the JOG dial button. The following window
appears.
5
Move the arrow (→) to YES and press the JOG
dial button. The settings selected in Step
dial button. The settings selected in Step
3
above are reflected in FACTORY and
CURRENT DATA on the screen.
CURRENT DATA on the screen.
6
Turn off the power supply once and then turn
on it again.
on it again.
◆
Notes
z
The settings are not saved unless SET is executed even if
NTSC, NTSC(J), or PAL is selected in the AREA SELECT.
NTSC, NTSC(J), or PAL is selected in the AREA SELECT.
z When AREA SELECT is revised, the “_ AREA SET” blinks.
z
z
When these items are set when the unit is used for the first
time, only the following 11 items are revised. When the other
settings of the unit are set in MAIN MENU, the MENU setting
values for items other than the following 8 are ones that were
set at the factory.
time, only the following 11 items are revised. When the other
settings of the unit are set in MAIN MENU, the MENU setting
values for items other than the following 8 are ones that were
set at the factory.
*1 SET UP of the SYSTEM MODE menu
(Enabled only for 480-59.94i)
*2 SET UP of the DOWNCON SETTING menu
(Enabled only for 1080-59.94i)
*3 Select THUMBNAIL
> SETUP > DATE FORMAT from the
thumbnail menu.
> [Setting the Thumbnail Display Mode] (page 132).
> [Setting the Thumbnail Display Mode] (page 132).
Color TV Standard Settings
(Settings for frame frequency)
*** OPTION MENU ***
OPTION
# AREA SETTING
< AREA SETTING >
# AREA SELECT: PAL
_AREA SET
AREA SET?
YES
YES
# NO
Factory
settings
NTSC
NTSC(J)
PAL
SYSTEM
MODE
MODE
1080-
59.94i
59.94i
1080-
59.94i
59.94i
1080-
59.94i
59.94i
1080-50i
REC FORMAT
AVC-I 100/
60i
60i
AVC-I 100/
60i
60i
AVC-I 100/
60i
60i
AVC-I 100/
50i
50i
CAMERA
MODE
MODE
60i
60i
60i
50i
SET UP
*1
7.5%A
7.5%A
0%
0%
SET UP (D/C)
*2
7.5%
7.5%
0%
0%
REAR LINE IN
LVL
LVL
+4dB
+4dB
+4dB
0dB
AUDIO OUT
LVL
LVL
+4dB
+4dB
+4dB
0dB
HEAD ROOM
20dB
20dB
20dB
18dB
GUI metadata
language
indication
language
indication
American
English
English
American
English
English
Japanese/
For Japan
For Japan
American
English
English
LANGUAGE
Not
displayed
displayed
Not
displayed
displayed
ENGLISH
JAPANESE
JAPANESE
Not
displayed
displayed
DATE
FORMAT
FORMAT
*3
MDY
MDY
YMD
DMY
AJ-HPX3100G(VQT3A79)_E.book 14 ページ 2010年9月17日 金曜日 午後9時21分