Panasonic PV-GS180 User Manual
Edit mode
46
LSQT0973
≥For more information, refer to the operating
instructions for your TV set and recorder.
≥When you do not need functional indications or
date and time indications, press the
[EXT DISPLAY] button on the remote control for
no indication. (When you connect the
Camcorder and a recorder with the DV cable,
these indications may not appear.)
[EXT DISPLAY] button on the remote control for
no indication. (When you connect the
Camcorder and a recorder with the DV cable,
these indications may not appear.)
ª
When neither image nor sound from
the Camcorder is output to the TV set
the Camcorder is output to the TV set
≥Check that the plugs are inserted as far as they
go.
≥Check the connected terminal.
≥When no image is presented on the TV even if
≥When no image is presented on the TV even if
set [BASIC] >> [AV JACK] >> [OUT/
Ë], set to
[OUT]. (
-60-
)
Using the DV cable for Recording
(Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the Camcorder by using the DV
cable PV-DDC9/PV-DDC9-K (optional)
DV terminal and the Camcorder by using the DV
cable PV-DDC9/PV-DDC9-K (optional)
1,
high-image-quality dubbing can be done in digital
format.
≥Set to Tape Playback Mode. (Player/
format.
≥Set to Tape Playback Mode. (Player/
recorder)
1
Connect the Camcorder and digital video
equipment with the DV cable.
equipment with the DV cable.
2
Set [ADVANCE] >> [REC STDBY] >> [YES].
(Recorder)
(Recorder)
≥You do not have to follow this step when the
remote control is used in the digital dubbing.
3
Start playback. (Player)
4
Start recording. (Recorder)
Move the joystick up to select [
¥/;] icon.
Or, while pressing the [
¥REC] button on the
remote control, press the [PLAY
1] button.
5
Move the joystick up to select the [
¥/;]
icon again or press the [
;] button on the
remote control to stop recording.
(Recorder)
(Recorder)
6
Stop playback. (Player)
ª
To cancel the standby for recording
When the Camcorder is in standby for recording,
move the joystick down and select the [
move the joystick down and select the [
∫] icon.
≥Do not plug or unplug the DV cable during
dubbing, or the dubbing may not be completed
properly.
properly.
≥If a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select
the desired sound using [SETUP] >>
[AUDIO OUT] on playback.
the desired sound using [SETUP] >>
[AUDIO OUT] on playback.
≥Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
≥Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
same mode as the [AUDIO REC] mode of the
playback tape.
≥The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
images.
≥If a picture containing a copyright protection
signal (copy guard) is recorded by the
Camcorder, the picture is distorted by
mosaic-like patterns at playback.
Camcorder, the picture is distorted by
mosaic-like patterns at playback.
≥Disconnect the USB cable since input signals
from the external input terminal cannot be
recorded while it is connected with the USB
cable.
recorded while it is connected with the USB
cable.
≥When wide images are input, the display such
as the menu screen or the operation icon is
expanded horizontally.
expanded horizontally.
≥While pictures are input from the DV terminal,
the operation icon blinks on instead of
appearing from the side of the screen when you
press the center of the joystick.
appearing from the side of the screen when you
press the center of the joystick.
1
DV
DV
LSQT0973ENG.book 46 ページ ２００６年１月３０日 月曜日 午前１１時４０分